Availability Of Replacement Mounting Hardware For Curt Trailer Hitch Receiver C13382

Question

Question:

Im looking to purchase just the hardware kit for this hitch. I bought the hitch last year and need to transfer it to a new car, but the hardware is installed in such a way that its not easily removed.

asked by: RJ F

0

Expert Reply:

We have exactly what you need.

To replace the mounting hardware for the Curt Trailer Hitch Receiver # C13382 you purchased you will need the replacement hardware kit # RHK.

When on the product page of the # RHK you will need to select Curt from the drop down menu, and then enter 13382 as the hitch number.

I included videos for both of the products mentioned for you to take a look at.

expert reply by: Samuel C

0

Answer 1

We actually have made specifically for situations just like this. You're just going to need the Replacement Hardware Kit for Trailer Hitches #RHK. In the "Hitch Item Number" box, you will enter your 76419 part number and we will send…

view full answer...

Answer 2

The square hole spacer blocks for your Curt Trailer Hitch Receiver - Class III #13147 are within the tolerances as you referenced. They are simply used to keep the bolt from rotating so you can torque the flange nut to specifications. I've…

view full answer...

Answer 3

Hey Jim, You are right that both of those hitches, #C13382 and #C22MJ, fit a 2025 Crosstrek. Capacity wise these hitches are rated for the same 3,500lb capacity. The main difference comes down to the trim of the vehicle. The #C22MJ is not intended…

view full answer...

Answer 4

The best hitch for a 2024 Subaru Crosstrek is the etrailer item #e98912. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 525 lbs…

view full answer...

Answer 5

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 6

Hi Rich! The B&W Trailer Hitch Receiver - Custom Fit - Class III - 2" #BW32PR for your 2025 Subaru Crosstrek (excluding the Hybrid) weighs right at 35 pounds. Which is pretty typical for a hitch of this design. Are you worried about adding…

view full answer...

Answer 7

Hey Brent! Thanks for reaching out! I took a look at the online owner's manual for your 2025 Subaru Crosstrek Limited and on page 412 it specifies that the max allowable tongue weight is 400 lbs (when towing a trailer with brakes). Subaru…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hey Brian, sorry for any confusion but we do have the Curt hitch 13634 you are looking for with the part #C54GJ which is a fit for your 2025 Subaru Crosstrek Wilderness.

view full answer...

Answer 10

Yes we do have mounting hardware for both your 2022 Kia Telluride or your 2022 Hyundai Palisade. All you're going to need to do is #RHK and enter your hitch's part number in the "Hitch Item Number" box.

view full answer...

Availability Of Replacement Mounting Hardware For Curt Trailer Hitch Receiver C13382

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching