Recommended Rear Suspension Enhancement For 2006 Ford Expedition

Question

Question:

Will this kit fit an 06 Expedition?

asked by: Juan G

0

Expert Reply:

I have another option for you, but the Air Lift 1000 Air Helper Springs for Coil Springs - Rear # AL61792 you were looking at is designed for the 1997-2002 Ford Expedition and will not fit your vehicle.

At this time the only rear suspension enhancement available for your 2006 Ford Expedition is the Coil SumoSprings Custom Helper Springs for Coil Spring Suspension - Front or Rear Axle # CSS-1168 which installs in between the coils of your rear coil springs as you can see in the included picture, and will help to keep your vehicle level when you have a heavy payload or are towing a trailer.

I included a video of the # CSS-1168 for you to take a look at.

expert reply by: Samuel C

0

Coil SumoSpring Installed In Coil Spring
(click to enlarge)

Answer 1

All 3 options are the same Coil SumoSprings: #CSS-1168 #CSS-1168R #CSS-1168F The difference in the part numbers just has to do with R is for rear, F is for front and then we have the regular number in case someone is looking for the part to fit a…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hi there Bill, For your 2020 Chevy Silverado 3500 with the 3,400-lb slide-in camper, I recommend the Firestone Ride-Rite Air Helper Springs #F2613. They have a 5,000-lb load-leveling capacity and can be adjusted side-to-side, which is especially…

view full answer...

Answer 9

Hey Kim, thanks for reaching out. The Firestone Ride-Rite Air Bags with Easy Mount Compressor #F24XV do fit your 2020 Ram 2500 with rear coil springs, but the hang-up is the under-bed gooseneck hitch. On your truck, the air bag brackets and the…

view full answer...

Recommended Rear Suspension Enhancement For 2006 Ford Expedition

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching