bing tracking image
  1. Vehicle Suspension
  2. Air Lift
  3. Air Springs
  4. Towing/Load Leveling
  5. Rear Axle Suspension Enhancement
  6. Light Duty
THIS ITEM IS NOT A FIT FOR
2019 Mercedes-Benz GLS
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Air Lift

Air Lift 1000 Air Helper Springs for Coil Springs - Rear

Part Number: AL61792
In Stock
$191.99
Retail:$264.99
You Save: $73.00
Vehicle Suspension
Not Confirmed to Fit

2019 Mercedes-Benz GLS

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
1,000-lb Capacity. Upgrade your vehicle's rear coil spring suspension with this kit. Molded polyurethane air springs fit inside your existing coil springs for added support when hauling heavy loads. Improves handling, braking, and overall ride. Great Prices for the best vehicle suspension from Air Lift. Air Lift 1000 Air Helper Springs for Coil Springs - Rear part number AL61792 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (1329)
  • Q & A (0)
  • Photos

Air Lift Vehicle Suspension - AL61792

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • 1,000-lb Load Support: Keeps your vehicle level under heavy loads for safer handling and braking.
  • Better Steering and Stability: Reduces sway and squat so your ride feels steady and predictable.
  • Even Tire Wear and Headlight Aim: Maintains normal ride height to protect tires and keep headlights aligned.
  • Adjustable Air Pressure (5–35 psi): Tune each spring for balanced support or side-to-side leveling.
  • DIY-Friendly Install: Fits inside rear coil springs with standard tools for quick garage setup.
Made in USA

Features to know about

Keep the Rear End Level and Stable: Up to 1,000 lbs of Load-Leveling Support

Heavy loads can make the rear of your vehicle sag, throwing off braking and steering. The Air Lift 1000 Air Helper Springs add up to 1,000 lbs of load-leveling support right inside your existing rear coil spring suspension. They keep your ride level when hauling or towing, help maintain proper headlight aim, and reduce strain on your tires and factory suspension. With added stability and better control, you’ll feel more confident on the road no matter what you’re carrying.

Dial In the Ride You Want: Adjustable 5 psi to 35 psi Air Pressure

Every load is different, so being able to fine-tune your setup matters. These molded polyurethane air springs let you manually adjust pressure from 5 psi to 35 psi for the support you need. Inflate both evenly for balanced loads or use dual air lines to level off-center loads. Add a compressor system (sold separately) for even more convenience in monitoring and adjusting air pressure on the go.

Smooth Out the Drive: Reduces Sway and Absorbs Road Shock

Rough roads or uneven weight can make a vehicle bounce and sway. The Air Lift 1000 springs help absorb road shock and minimize sway for a smoother, more stable ride. By supporting your rear suspension under load, they make steering feel tighter and braking more predictable while cutting down on bounce and body roll.

Built Tough for Long-Term Use: Durable Molded Polyurethane Construction

When you’re hauling heavy loads, reliability counts. These air springs are constructed from durable molded polyurethane that stands up to years of use inside your coil springs. The kit includes two air springs, heat shields, tubing, Schrader valves, and all necessary hardware for installation with standard tools. A lifetime warranty and 60-day satisfaction guarantee back it all up so you can install with confidence.

Specs

Weight and Capacity

  • Load-leveling capacity: up to 1,000 lbs

Air Pressure

  • Adjustable air pressure: 5 psi - 35 psi

Warranty

  • Lifetime warranty
  • 60-Day satisfaction guarantee

61792 Air Lift 1000 Air Bag Suspension Support System for Coil Springs - Back

Installation Details AL61792 Installation instructions

This Product Fits The Following Vehicles




Ratings & Reviews

4.6

1329 reviews
5 Stars
(1028)
4 Stars
(180)
3 Stars
(43)
2 Stars
(30)
1 Star
(48)
Review Sort Icon
by:
Product works great. Already hooked the camper up and can tell an immediate difference.
by:
The kit looks ok but has plastic fittings which are junk and forget about them lasting very long.
by:
2000 Ford Expedition
Installed on a 2000 Ford Expedition. I removed the springs and installed the bags outside of the vehicle. This was much easier than trying to install while springs were in the vehicle. It still was pretty hard, I resorted to using a hand held vacuum pump (like what you use for bleeding brakes) to fully deflate the bags which made it easier.

Outside of installation, my only real complaint, and why I gave it 3 stars, is the schrader valve hardware is junk. I have it mounted in the bumper next to license plate and it was showing rust within two months. About 6 months in and the nut and threaded valve body were completely rusted. I'm in the NW with no salted roads or anything. The nut broke trying to remove it since it was so rusted. I replaced it with stainless steel ones I found online.

Functionally the bags work as expected and make the vehicle sit more level when I have my 5000 lb trailer attached. Just remember to inflate bags before putt load on. Don't attach trailer then pump up bags and expect to see rear of vehicle lift up.
by:
There was a little hiccup at first, but etrailer fixed it fast , like the next day. What a great customer service team! I'm hooked!
by:
Fast delivery installation was a breeze working good for our travel trailer towing
by:
1999 Ford Expedition
Fast delivery!
by:
2000 Ford Expedition
Great Kit! I’ve never had any problems with it. The easiest to use and put on. Totally recommended!
by:
1999 Ford Expedition
Took about three and a half hours for installation other than that Airbags work great
by:
Great product
by:
by:
2001 Ford Expedition
by:
2019 Kia Sorento
Word of advice: It was WAY easier to just remove the coil springs and install the bags that way. (2016-2020 Kia Sorento)

Lift the rear end, remove wheel, disconnect the lower control arm, shock, and sway bar link. Take out the coil spring and insert the bag from the top. Reassemble in reverse order and torque bolts to spec. Much easier.

From that point it was just a matter of routing the air lines through the control arms, up through the subframe, over the spare tire, to the trailer hitch mount. Bags seem to hold air well and are holding up so far. Definitely made an improvement in handling around corners.

Note: There is a noticeable squeaking/noise from the rear end going over bumps at low speeds. Once you're on the pavement or up to speed it improves.

Loses one star for the noise and install. Otherwise not a bad product for the price, especially if you're the DIY type. I personally work on cars, so maybe it was a little easier for me.
Christopher H. profile picture
Etrailer Expert

Christopher H.

9/17/2026

Thanks for all of the detail here Charlie and really appreciate the photo!

by:
Hummer H2
I purchased this product for some additional support for our Hummer H2 when we are towing our travel trailer. I removed the springs for easier installation of each bag.
I am 66 years old and total time from start to completion was 3 1/2 hours from set up to clean up !
Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

4/10/2025

The helpers look great on your Hummer, Rob! What kind of travel trailer are you hauling?

Rob profile picture

Rob

4/10/2025

@GwendolynY We are towing a 16’ travel trailer and the bags add just a little extra support for bumps so I won’t get sag or excessive rear end bounce.
Rob profile picture

Rob

4/11/2026

I have towed my RV several times over the last year and these helper springs work perfectly! I had a very small air leak but I added some silicone at the airline connections and it is 100 percent! I carry a battery powered air compressor with me and it’s basically a “set it and forget it” systems.

by:
Works great on my 2000 Lexus LX470. I installed these to supplement my AHC deleted suspension. These were installed with Land Cruiser rear springs. Instructions were easy to follow. Routed separate air lines (did not use the y connector) above the frame and fitted the valves into existing holes on the bumper. Run them at 8-10 psi when I have gear in cargo area. Holds air perfectly.
Lazer S. profile picture
Etrailer Expert

Lazer S.

1/13/2026

Glad they are working well for you, Scott! I gotta ask, did you do the AHC delete as it was worn our or did you just not particularly like it? I've heard people do this for either reason.

Scott profile picture

Scott

1/13/2026

@LazerS The AHC system was great when working optimally but mine was wearing out. The globes were starting to fail, both rear hydraulic shocks were weeping, and the ride was getting firm over small road imperfections. I decided to do the AHC delete for cost effectiveness, reliability, and possible future suspension upgrades.
by:
Put these on my 2020 Equinox, it has a tow package and pulls my little Wildwood trailer just fine but with this airliift system it feels SOOOO much more stable!! It drives much less ‘mushy’ and handling is a dream. These are simple to install, perfect product for pulling with a light duty SUV, I am extremely impressed.
Lazer S. profile picture
Etrailer Expert

Lazer S.

7/20/2026

Glad to hear they are making towing a more comfortable experience, Mark! Cool little camper as well! ^___^ Where did you guys take it?

by:
2021 Jeep Wrangler
These air springs are one of the best investments you can make if you have a 4XE Wrangler. The battery pack is so heavy, I am finding after a couple of years the factory springs are getting too spongy and the body lean is more noticeable on the road especially cornering. Plus when you go over larger bumps the body sway is much more noticeable. I looked into an air spring set up but did not really want to spend several thousand dollars and I was surprised when I came across this set for under $[XX]. I was sceptical but thought, why not. They arrived in a small box and I was even more doubtful but when I opened it and took out the kit, I was impressed with the quality of the materials. I followed the instructions (with a few exceptions) and found them to be very easy to install. If you take your time with routing the air lines over the factory heat shields and carefully bring them to the rear drivers side, you can install them using the t connector. You can drill a hole through the thin part of the bumper right beside the license plate. There is just enough air line included to do this. The Schrader valve seats perfectly and makes it very convenient to add or bleed air from the system with only one adjustment. I set the springs at 12 psi and coupled with my after market adjustable shocks, I can make my Wrangler so smooth it feels more like a European SUV than a Jeep. Excellent product.
Arthur profile picture

Arthur

9/25/2025

The air springs are still operating as well as the day I installed them. They do not leak any air pressure nor have they degraded in any way. What a great and simple solution that lasts.

by:
2009 Chevrolet TrailBlazer
We install these on our customers 09 trailblazer to haul a big camper and they really helped a lot! Not just with the towing but just the daily driving and ride quality. 5 stars for sure. It’s a good kit and good price but add a on board compressor and really fine tune things
by:
2005 dodge Ram Pickup
I knew going into this, this was going to be a pain to install. After 5 hours, I had to call a friend who was a mechanic to come over and help get the bags into the springs. We finally read enough reviews where people said to heat up the bags a little, fold them and zip tie them. This worked! But.....Here we are, they've been installed, traveled over 2000 miles with them in and let me tell you, the noise! OMG THE NOISE! Every bump, dip, hell - I think just for the fun of it - my car squeaks like a 1970's Cadi! I've used multiple Teflon lubricants, Bearings Grease and other various lubricants. NO, I didn't use WD40. You can hear me coming down the road the noise is that loud. I called Airlift as instructed and they advised me that they're not even showing that these are a match for my car although Etrailer does. The tech that I spoke to told me that if I've driven that much, with and without loads, adjusted the PSI (which I have. I've gone from 5-35psi as instructed. No matter where I am sitting, it is loud! For someone who is tone sensitive with high PTSD and ADHD/OCD - this is not working. Airlift said that there's a 60 day ride approval. I don't approve as I've gotten to the point that I don't even want to drive my 2025 car! Instead, I've been driving a 2005 van if I need to go to the store or anything. I've truly tried to let these be the savior of my needs, but I think I'm going to just bite the bullet and get a Gladiator or Ram.
Donnie M. profile picture

Donnie M.

6/16/2026

Well, after going back and forth - basically it comes down to - 60 day drive warranty doesnt compute. So after spending $300 on install, now Im expected to spend another $300-$400 to have them removed to return them, oh and pay for return. So roughly $800 to get back $130. Ill chalk this up to understanding that if a product doesnt work out in any manner. To remove these, you have to take the rearend of the car off - shocks and springs - then try to get the bags out of a much smaller ending without damaging otherwise youll not refund. Basically no support, other than a were sorry.

James D. profile picture
Etrailer Expert

James D.

6/16/2026

@DonnieM Thank you for taking the time to share your experience. We're very sorry to hear how frustrating this has been for you, especially after the time, effort, and additional expense you invested into the installation. I do want to clarify that these Air Lift air bags are confirmed to fit your vehicle application, this has been confirmed through Air Lift. However, we completely understand that while a product may be compatible with a vehicle, that doesn't necessarily mean it will meet expectations in terms of ride quality, noise levels, or overall satisfaction. While I realize that doesn't change your experience, I do want to sincerely apologize that these air bags have not delivered the results you were expecting. We appreciate your feedback and the detailed information you've provided. Thank you again for sharing your thoughts, and I'm sorry this solution did not work out the way you had hoped.
by:
Awesome Air Bag support for my rear springs for my 2014 Toyota Sienna 3.5" lifted van. It stopped rear sag with heavy loaf and body roll when driving.
by:
2015 Honda Odyssey
After installing I was very happy with the performance of the Air Lift kit.
A few notes I will highlight to help with install:
-When using the template, the hole is closer to the inside of the center of the van.
-Use a Step Drill bit to cut the hole in the lower control arm. I got mine from HF.
-Route the air hoses thru the lower control arms and zip tie them up along the rear subframe
-I sprayed with air bags with Lithium grease to keep any noises from occurring
-3d printed a bracket to hold the fittings on my rear hitch
by:
Chevrolet Silverado 1500
I put the Airlift 1,000 kit on our Suburban LT 1500 which has a towing package on it to enhance the vehicles ability to lessen frost heaves on our Alaskan highways while towing our travel trailer. The air shocks of the towing package although heavy duty were stressed out on trips down the Alcan. The new airbags are working just fine and were easy to install. After ordering the kit, it arrived within the week. The instructions were easy to follow.
by:
Overall, a surprisingly great benefit for very little cost and a little effort. Took some time to install (no harder than anticipated), the videos were very helpful. I struggled to get the connections all airtight, always had a slight leak. However, still saw a benefit to my suspension and ride, even when not towing. For our 2019 Pathfinder, where the "tow weight" is definitely a little fudged, these where a big help.
Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

5/20/2026

Thanks for the great follow-up review, Jimmy! Glad to hear the system made such a noticeable difference in both ride quality and suspension support, even when you’re not towing. It’s also great to hear the install videos helped out along the way. Air connections can definitely be the most finicky part of the install, so we appreciate you mentioning that for others considering the setup. Sounds like the end result was well worth the effort on your Pathfinder. Thanks again for sharing your experience a year later!

by:
Fit my 2019 Toyota Senna AWD perfectly. Easy to install. didn't even have to disconnect exhaust hanger as instructed. instead i used a 1/2 drive universal joint with sockets to access bolt holes on passenger side. I pull a 2500lb boat or a 2000lb trailer with no problems. I use 15 to 30 lbs air pressure to keep level. i used two valves and separate air for each bag. I didn't want it shifting in long turns. I highly recommend and would buy again....
Big B. profile picture

Big B.

8/3/2021

Still working great no leaks would buy againfor any senna rear with coils...

Big B. profile picture

Big B.

4/2/2026

5 years later still working great hold air wo leaks and prevent bottoming while towing 3000 lbs

by:
I was replacing the same setup that I installed in 2007 it held air until last year Had to drop the rear axle to install but once everything is in place it work perfectly it's held air for a year would recommend placing as many of the fittings and the air input valve inside the truck they will last much longer
by:
The product does exactly what it is designed to do at a very reasonable price point. The two star reduction is based on the uber difficult installation process for bags on this model vehicle. Other systems I've installed were done with the coil spring removed, and reinstalled. Ten minutes a corner. Having to contort this bag through the opening between two coils of the installed spring is unlike anything I've encountered in 50 years of mechanical work. No matter how much soapy water I applied, every minute or two, getting a midline crease in the semi-folded bag over an inch wider than the spring OD through and into the inner spring diameter was tortuous. It was every bit of two hours work for just the bag insertions, and I have a full car lift like the video, and removed the wheels for best leverage and access. Once the bags are in; the rest is a cake walk.
25
1329
true
Show More Reviews

See what our Experts say about this Air Lift Vehicle Suspension

  • Suspension Enhancement Kits for 2010 Ford Expedition EL
    The Air Lift air spring kit # AL61792 that you referenced is definitely a no-fit for your vehicle but we do have suspension helper spring kits for your 2010 Ford Expedition EL that will help to support its stock suspension. SuperSprings offers both a front-axle and a rear-axle coil helper spring for your EL. For a front-axle kit you can use part # CSS-1094F if your Expedition is 4WD. Rear-axle kit # CSS-1168R fits if your EL is 2WD. Installation of these kits is simple. You insert the...
    view full answer...
  • Helper Spring Option for 2019 Ford Expedition
    Because your Expedition has a coil spring rear suspension, there isn't an air helper spring system available but we do have a helper spring option for your vehicle, though. I'd recommend the Coil Sumo Springs, part # CSS-1168R which is the only option we offer for the 2019 Expedition. The Coil Sumo springs install between the coils of the spring, providing additional support which reduces rear-end sag when towing. It will also reduce body roll in turns
    view full answer...
  • Coil Spring Air Bag Kit Comparison for a 1997 Ford Expedition 4WD
    The Firestone Coil-Rite Air Helper Springs, # F4134 and the AirLift 1000 Air Helper Springs, # AL61792, are essentially the same product. The main differences between the two kits are the included parts. Both kits come with everything needed to complete the installation, but the Airlift 1000 kit includes two additional round air bag supports for the top of the bag. The Coil-Rite kit provides bag supports for the bottom of the bag only. I have attached the installation instructions for...
    view full answer...
  • Installation Information For Firestone Coil-Rite Air Helper Springs # F4134 on 1999 Ford Expedition
    You will not need to remove the springs on your 1999 Ford Expedition in order to install the Firestone Coil-Rite Air Helper Springs # F4134. You will insert the deflated air bags into the coiled springs from the bottom as shown in the graphic I have provided. I have also provided a link to the full installation instructions for this product. These air springs will help reduce tire wear but will not increase your vehicles weight-carrying capacity. The weight capacity of these springs are...
    view full answer...
    Image 1 for
  • Recommended Rear Suspension Enhancement For 2006 Ford Expedition
    I have another option for you, but the Air Lift 1000 Air Helper Springs for Coil Springs - Rear # AL61792 you were looking at is designed for the 1997-2002 Ford Expedition and will not fit your vehicle. At this time the only rear suspension enhancement available for your 2006 Ford Expedition is the Coil SumoSprings Custom Helper Springs for Coil Spring Suspension - Front or Rear Axle # CSS-1168 which installs in between the coils of your rear coil springs as you can see in the included...
    view full answer...
    Image 1 for
  • Best Way To Remove Rear End Sag On a 2015 Ford Expedition EL XLT When Towing a Travel Trailer
    The best product for leveling your 2015 Ford Expedition EL XLT when towing a travel trailer is with a Equal-i-zer Weight Distribution System # EQ37100ET. This will allow you to level your Expedition with the weight distribution and will also give you trailer sway control to make driving safer and less work. This particular hitch system is rated for trailers that have a tongue weight of 600-1,000lbs and a maximum total weight of up to 10,000lbs. An included adjustable shank will allow you...
    view full answer...

Do you have a question about this Vehicle Suspension?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Adam R
Expert Research:
Adam R
Employee Tricia G
Updated by:
Tricia G
Employee Mary K
Updated by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Alex H
Updated by:
Alex H
Employee Noah M
Updated by:
Noah M
Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.