bing tracking image
Customer Service My Orders
  1. Home
  2. Help Videos And Articles
  3. Accessories and Parts Help Hub
  4. Accessories and Parts Q&As
  5. Question 532830
Q & A Icon

Which Bearings Fit in the Kodiak Disc Brake Kit for 5200 to 6000-lbs Axles  

Updated 04/23/2021 | Published 04/21/2021



Question:

2018 Rockwood 8289WS ultra lite 5th wheel Dexter TRI TEC 010-036-00 5 bolt flange 6 on 5 1/2 lugs Tandem axils looking to install - Hydrastar activator line kit CAR-HBA 15-2 - Kodiak trailer brakes K2HR526D 2 sets Questions: - not confident on wheel bearings required for Kodiak hubs. DBRKHW6EZ ? - is there something else Im missing?

0

Expert Reply:

The Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs # K2HR526D you referred to use a # 25580 inner bearing and # 15123 outer bearings, which come included with the hubs. These are the same bearings that come in the # DBRKHW6EZ you were referring to, as well as the matching races and grease seals. You will want to make sure that these are the same bearings that are on your existing hubs so that you've got the correct kit. These are all compatible with the HydraStar Electric-Hydraulic Actuator w/ Line Kit for Disc Brakes - 1,600 psi # CAR-HBA16-2.

If you pull your hubs and find different bearings than the ones mentioned, let me know what you find and we can see if there is an alternative solution for you to add electric-over-hydraulic disc brakes to your Rockwood UltraLite. These would be all the parts you need to get up and running, but you'll want to also make sure your brake controller is compatible with EOH brakes. If you don't have an EOH compatible controller, let me know what the tow vehicle is and I can recommend something for that as well.

expert reply by:
0
Erik B
Ask The Experts a Question >>

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>