Bearing Kit for Trailer Brakes with 12" Hub/Rotor - Easy Grease - 5,200 lbs to 6,000 lbs

See what our Experts say about this etrailer Accessories and Parts

• How To Find Correct Replacement Bearing Kit for Grand Design Reflection 28BH
  I don't know the axle weight capacity of a Grand Design Reflection 28BH but due to it's weigh I can estimate it to be 5,200 lbs. In which case, the Bearing Kit for Trailer Brakes with 12" Hub/Rotor part # DBRKHW6EZ should be correct but the only way to confirm this is to reach out to the mfg with your VIN or go crawl under the trailer and look for the axle tag.
  view full answer...
• Recommended Disc Brake Assembly For Tandem 4,700lb Axles
  The Kodiak Disc Brake Kit # K2HR526DKG that you were looking at would be a compatible fit for your 4,700lb axles based on the information you provided. You will also need to replace your bearings and grease seals so I recommend the Bearing Kit for Trailer Brakes with 12" Hub/Rotor # DBRKHW6EZ to go along with your new disc brake assembly.
  view full answer...
• How To Determine The Correct Trailer Brake Assembly
  Thank you for the picture it helps a lot when determining these parts! Reading the label tells me this is a Dexter D52 axle with a capacity of 5,100lbs, with that information I recommend using the Dexter Nev-R-Adjust Electric Trailer Brake Assembly # 23-459 for the right side, and the Dexter Nev-R-Adjust Electric Trailer Brake Assembly # 23-458 for the left side. For your bearings you'll want the Bearing Kit for Trailer Brakes with 12" Hub/Rotor # DBRKHW6EZ.
  view full answer...
  
• Which Bearings Fit in the Kodiak Disc Brake Kit for 5200 to 6000-lbs Axles
  The Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs # K2HR526D you referred to use a # 25580 inner bearing and # 15123 outer bearings, which come included with the hubs. These are the same bearings that come in the # DBRKHW6EZ you were referring to, as well as the matching races and grease seals. You will want to make sure that these are the same bearings that are on your existing hubs so that you've got the correct kit. These are all compatible with...
  view full answer...
• Adding Electric Over Hydraulic Disc Brakes to Boat Trailer
  While we don't have a go to kit we can build one using parts that are available. First is the HydraStar Vented Marine Electric Over Hydraulic Actuator # HS381-8067. If you are building from scratch we have the HydraStar Marine Electric Over Hydraulic Actuator w/ Breakaway and 7-Way RV Harness # HS381-9067 to include the wiring and battery components. Second is the Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 # K2HR526DKG. These assemblies are rust resistant for your boat trailer....
  view full answer...
• Replacement Brake Kit and Hubs/Rotors For a Continental Trailer With 5,880LB Trailer Axles
  I recommend the Kodiak Disc Brake Kit # K2HR526D for your continental trailer. This kit includes the calipers, mounting brackets, and 12" hub/rotor to fit on one of your axles. You will need the Bearing Kit # DBRKHW6EZ to work with this brake kit. The bearing kit includes grease seals with a 2.250 inner diameter. If your spindle is the smaller 2.125" you will need the Grease Seals # RG06-090 to fit the smaller spindle.
  view full answer...
• Recommended Disc Brake Conversion Parts For a 2019 Grand Design Reflection 337RLS 5TH Wheel Camper
  For your 2019 Grand Design Reflection 337RLS I recommend the Kodiak Disc Brake Kit # K2HR526D. This uses the same 6 on 5-1/2" bolt pattern for your current wheels and has a Dacromet coating to prevent corrosion. You will need 2 of these kits for both your axles along with 2 of the Bearing Kits # DBRKHW6EZ. I recommend using the Hydrastar Vented Marine Electric Over Hydraulic Actuator # HS481-8067 as it allows for a simpler plug and play installation of the components. Then you will be...
  view full answer...
• Complete Disc Brake Kit For 5,200LB Tandem Trailer Axles With 6 On 5-1/2" Lug Pattern
  We will have the components you need as we do not have a complete kit like the HydraStar Disc Brake Kit # HSE7K-T1 for your 6 on 5-1/2" 5,200lb trailer axles. You will simply need two Kodiak Disc Brake Kits # K2HR526DKG, two Bearing Kits # DBRKHW6EZ, a HydraStar Electric Over Hydraulic Actuator For Disc Brakes # HBA16, and a HydraStar Hydraulic Brake Line Kit # HS496-252
  view full answer...
• Disc Brake Kit for 2018 Coachmen Chaparral 336TSIK
  While we don't have a complete kit as a single part number to add a Hydrastar Electric Over Hydraulic setup to your 2018 Coachmen Chaparral 336TSIK we do have all of the components you'd need. You will simply need two Kodiak Disc Brake Kits # K2HR526DKG, two Bearing Kits # DBRKHW6EZ, and the Hydrastar Electric Over Hydraulic Actuator with Line Kit # CAR-HBA16-2 and you'd be set.
  view full answer...
• Parts Needed to Convert to Electric Over Hydraulic Disc Brakes on 2018 Grand Design 5th Wheel
  To get your electric drum brakes converted over to an electric over hydraulic dis brake set up, the HydraStar Electric Over Hydraulic Actuator Kit for Disc Brakes - 1,600 psi # HBA16-252-82 is a great place to start. This includes all the lines/fittings needed for a single or double axle trailer as well as the actuator and the break away kit as well. To complete the system, you will need the Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs # K2HR526D....
  view full answer...
  
• Will 7,000lb HydraStar Disc Brake Conversion Kit Fit a 2021 Jayco Eagle 321RSTS W/ 6,000lb Axles?
  I would be happy to help! First things first 5,200 - 7,000lb axles are all compatible with the same hubs so you can use the HydraStar Disc Brake Kit w/ Actuator for Tandem Axle Trailers - 13" Hub/Rotor - 8 on 6-1/2 - 7K # HSE7K-T1 on your 2021 Jayco Eagle 321RSTS. I see you mentioned an HSE6K-T1 kit but HydraStar does not offer such a kit. The brake pads used are a bit different as they are designed for heavier trailers but they will still be OK. The biggest thing you need to check is...
  view full answer...
• Which Disc Brake Kits Are Compatible With Timbren 5200lb and 7000lb Axle-Less Systems?
  The Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle w/ Brake Flange - 5,200 lbs # TASR5200S03 you mentioned are indeed compatible with the Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet/KodaGuard - 5,200 to 6,000 lbs # K2HR526DKG you mentioned. You will need two of the bearing kits # DBRKHW6EZ as the brake kit does not include bearings, grease seals, or grease caps. The Timbren Axle-Less Trailer Suspension System - Spindle w/ Brake Flange - Regular Tires -...
  view full answer...
• Can I Upgrade To Disc Brakes On My 2021 Grand Design Transcend Travel Trailer With 4400 Pound Axles?
  Due to the Dexter 4,400 pound axles using an uncommon bearing combination (inner bearing # L68149 (1.378" inner diameter) outer bearing # LM67048 (1.25" inner diameter)), you will be pretty limited on options. With that said, the only option we will have will be to replace the axle with something that uses a more common bearing combo. As an example, the Dexter 5,200 Pound Trailer Axle Beam with E-Z Lube Spindles # 6340624 will use the inner bearing # 25580 (1.750" inner diameter) and outer...
  view full answer...
• Replacement Electric Brakes for Dexter PR-FF SEC-FF 5.2KPR-GGSEC-GG 12X2XQ 36-89
  Based on the photo and information you provided, I can tell you have 12 x 2 inch Dexter brake assemblies for 5.2K axles, for which the Electric Trailer Brake Kit # AKEBRK-7-SA will be an excellent replacement. These are self-adjusting brakes so they do not require periodic manual adjustment like standard brakes. To replace the original brake mounting bolts, nuts and lockwashers, you can use # BRKH12.
  view full answer...
  

Do you have a question about this Accessories and Part?