Installation of Reverse Lockout Solenoid Kit for Demco DA66B Actuator DM5836

Published 04/20/2021

Question:

I need the instructions for Reverse Lockout Solenoid Kit for Demco DA66B Hydraulic Brake Actuators - Non-Bypass. Non were shipped with and link provided to manufacturer does not work.

asked by: Mat

Expert Reply:

I reached out to Demco, who said they don't have an installation manual for the Reverse Lockout Solenoid Kit for Demco DA66B Hydraulic Brake Actuators - Non-Bypass # DM5836.

They said the reason for that was it was just a few steps, though they did detail the process, as follows:

"All that is required is to take out the two bolts in the back that hold the master cylinder in place, and mount the solenoid cover to that location using the same bolts. To place the inline solenoid on the back side of the master cylinder, disconnect the brake line and take that brass fitting off the master cylinder. Then thread the inline solenoid to the back side of the master cylinder, and re-connect the brake line to the back side of the solenoid. One of the wires on the solenoid will need to be grounded, and the other will need to connect to the reverse power source."

expert reply by: Kyle S