Is Firestone Coil-Rite Installation Hard to Do on a 2001 Ford E-450 Chassis Motor Home

Question

Question:

how difficult is it to install these on my e 450 motorhome coil springs in the front thank you

asked by: Ron

1

Helpful Expert Reply:

I would not say that installation of the Coil-Rite springs # F4101 is all that difficult. You will need to temporarily remove the lower shock bolts to allow the axle to hang freely, and you have to release the top of the coil spring to get the bag in place. I have included a link to the installation instructions for you to view.

Routing the air lines might be the most time-consuming part of the installation. Be sure that when you cut the lines you use a air hose cutter like # AL10530 to get the best cut possible.

expert reply by: Michael H

1

Answer 1

First, I truly appreciate your thoughtful question and all the information you provided; that is really helpful to try and get you the best solution. So let's get into the sway bars, and your research was on point, they are absolutely the best…

view full answer...

Answer 2

For your 2024 Ford E-450 Motorhome, I recommend the Firestone Ride-Rite Air Helper Springs #F22ZR. These are the 5,000 lb capacity air bags, and they will do a great job to help level your ride when you are towing. They will also help to absorb shock…

view full answer...

Answer 3

SumoSprings are a super popular option to help support the suspension and increase ride quality for motorhomes. The majority of the installs we have come through the shop are typically SumoSprings because they offer a much softer progression instead…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hi Todd, I know exactly the feeling you’re describing, and you’re definitely not alone. That floaty, pushy feeling at highway speeds, especially when trucks pass, is really common on the Sprinter 3500 chassis with a taller coach like your Tiburon,…

view full answer...

Is Firestone Coil-Rite Installation Hard to Do on a 2001 Ford E-450 Chassis Motor Home

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching