Can RAM Bolt Lock BL7018448 be Keyed More than One Time

Question

Question:

I have a RAM Bolt lock keyed to my old truck and it worked great, I traded and bought a new RAM truck and a new Bolt Lock, works wonderful. Is there a way to re-key / re-train the lock to the new RAM key?

asked by: Mike

0

Expert Reply:

The BOLT hitch locks can only be keyed one time. So if you bought a new truck and have now a new key you'd a new lock with the part # BL7018448.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

Hey Hadiya! No, the Curt E16 5th Wheel Hitch w/ S20 Slider for Ram #C85PV will not give you enough clearance to maneuver the Layton Skyline 5th wheel with your 2021 Ram 1500 with a 5-1/2' bed. This unit only moves you 12" back from the…

view full answer...

Answer 5

Hey John, thanks for the picture of your truck bed! To install a set of 5th wheel rails in your 2022 Ram 2500, I recommend the B&W Custom Installation Kit w/ Base Rails item #BWRVK2602. This set of rails are industry standard so they'll work…

view full answer...

Answer 6

Sergio, yes, the PullRite SuperGlide part #PUL63RR will work with your MORryde cushioned pin box like part #MR55QR. you will just need to pair it with the PullRite SuperGlide Quick Connect Capture Plate part #PUL76RR for the setup to function…

view full answer...

Answer 7

Hi James! With your GVWR being 7,600 pounds, your loaded tongue weight should be around 760 pounds. With that said, I recommend going with the Weigh Safe True Tow Weight Distribution Hitch - 2" Shank - 6" Drop - 8.5K GTW, 850 lbs TW…

view full answer...

Answer 8

Weight distribution works to distribute the tongue weight of a trailer up to the front axle of the tow vehicle so that it will sit more level and handle/brake better. That being said the systems do not "reduce" tongue weight or allow you to…

view full answer...

Answer 9

Hey Rex! Those are some great questions. A weight distribution hitch (WDH) isn't always needed but in your case you will want one. Typically if the weight of your trailer is more than 50% of the weight of your vehicle it is a good idea to use a…

view full answer...

Answer 10

Hey Steve. The 12.5K Weigh Safe True Tow Weight Distribution Hitch item #WS94RR is going to be the best option for your Jayco trailer. You've done your homework well and with the range of 760 lbs - 1,160 lbs tongue you are not going to want to go…

view full answer...

Answer 11

Hello Dave, thanks for reaching out. The Advent Air RV Air Conditioner #ADV86SR uses the new R32 refrigerant instead of the old r410a. Any R32 unit will not be backwards compatible with r410a AC systems. The r32 refrigerant is more flammable, so AC…

view full answer...

Answer 12

Hey Larry, the Dometic FreshJet 3 part #DMC69ZR that you referenced does not require an additional control board to work. Basically you just need to run the power wires to it and it' ready to go as the controls are internal and on bottom of the…

view full answer...

Can RAM Bolt Lock BL7018448 be Keyed More than One Time

Product Page this Question was Asked From

Continue Researching