Ordering Dexter 3,500 lb Axle with 5 on 5 inch Bolt Pattern
Updated 05/05/2020 | Published 05/04/2020
Products Featured in This Question
Question:
Do you have this axel with 5 on 5 pattern?
asked by: Ernie
0
Expert Reply:
I can help you get basically the same thing as the # 7359765-EB but with the bolt pattern you need but we don't have it as a complete kit. You'd need the bare axle part # 7359765, the hubs # 84556UC3, and then the brake assembly set # 23-26-27 and you'd be set!
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 80 Inch Spring Center
- 95 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Search Results: grease seals ~ double lip trailer bearings races seals caps
- Search Results: for 3500 lbs axles trailer hubs and drums
- Search Results: grease seal 58846
- Q&A: What Size Tool to Use to Install Race for 3,500 lb Trailer Axle Hub Bearing
- Article: Double-Eye Trailer Suspension System Review
- Search Results: 10 inch wheel trailer hubs and drums
- Search Results: 3500 lbs trailer leaf springs
- Search Results: trailer suspension parts
- Search Results: 5 on 5 inch trailer hubs and drums
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Video: Let’s Check Out the Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-3/4 - Pre-Greased
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Q&A: All Parts Needed to Upgrade a 3,500 lbs 86-1/2" Hub Face Axle to a 6,000 lbs Axle
- Q&A: Is B and W Continuum Weight Distribution System Worth it Over Standard WD System
- Article: How to Measure a Trailer Axle
- Q&A: Which Trailer Axle Company is Best, Lippert Dexter or Al Ko
- Q&A: Does Goodyear Endurance ST205/75R15 Radial Tire Come Balanced
- Q&A: Can Too Much Air Pressure In Air Bags Cause Sway Issues When Towing?
- Q&A: How Do I Measure the Drop Distance on a Trailer Drop Axle?
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Determine Tire/Wheel Diameter
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub