Can Maxxaire Circuit Boards 10B21275KE and # 10-21275KE Interchange

Question

Question:

The Maxxaire part number has Ben updated to a 10B21275KE. Can part number 10-21275KE be used instead? What is the difference in the part?

asked by: Murray

0

Expert Reply:

The 10B21275KE part # MA39FR replaces the 10-21275KE you mentioned as well so if you had an older model number you could use it in same application.

expert reply by: Jameson C

0

Answer 1

Since multiple MaxxAir Fans have the same features that you listed it's honestly best to first determine the exact model number you have before purchasing anything and end up not having it be compatible. I've listed below all the available…

view full answer...

Answer 2

The 10C21275KEZ didn't come back to anything for me which means it's most likely already been replaced with a new version but I can't confirm which with just the part number. We typically just replace the circuit boards based on the model…

view full answer...

Answer 3

I did some checking and for the MaxxAir the correct replacement circuit board is the #MA39FR.

view full answer...

Answer 4

Yes, the Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Exhaust Only Fan #MA39FR is the correct replacement circuit board for your 8501 model.

view full answer...

Answer 5

The two most likely causes of a MaxxAir vent fan lid not opening or closing are either going to be a lift motor or operator failure. I recommend removing the motor and applying power directly to this to see if the shaft turns. If not, you know the…

view full answer...

Answer 6

The correct Replacement Operator Mechanism for your model 4751KS MaxxAir MaxxFan is part #MA10-20281K-1AF. If your fan lid is unable to open even manually, then this is the part you need to replace. The other part you referenced, #MA10A04751KS would…

view full answer...

Answer 7

Since you have the exhaust only model the correct replacement circuit board is the Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Exhaust Only Fan #MA39FR.

view full answer...

Answer 8

We do have the exact parts you need and yes you can order it through us! I verified with the manufacturer for you that the correct parts for your MaxxAir 4801K are the following: - Replacement Operator Mechanism #MA10-20281K-1AF - Replacement Lift…

view full answer...

Answer 9

Hi James, The INC115342 part number you gave me unfortunately doesn't come back to anything. Do you know what the model number of your vent is? If not the boards will typically have a tiny white sticker on them with some info that I could use to…

view full answer...

Answer 10

I've attached the owners manual for your 4900K model which is similar to the #MA00-04500K model. It sounds like your operator mechanism is bad according to my tech contact at MaxxAir. For your 4900K model you will want the Replacement Operator…

view full answer...

Answer 11

I can't find any info on the part number you mentioned but could I maybe see a picture of the and/or know what specific fan you have installed?

view full answer...

Answer 12

If you have 12 volts going to the fan it is motor. You will need the Replacement 12-Volt Variable Speed Fan Motor for MaxxAir MaxxFan RV Roof Vents item #MA10-20968. If the voltage isn't going to the motor than it could be the controller which is…

view full answer...

Can Maxxaire Circuit Boards 10B21275KE and # 10-21275KE Interchange

Product Page this Question was Asked From

Continue Researching