How To Install Item # 118281 On 2010 Nissan Pathfinder
Updated 04/08/2021 | Published 04/06/2021 >
Question:
Hello I have a 2010 Nissan Pathfinder LE . I purchased the kit #118281 awhile back so I could tow my camper but just got around to hooking it up but there is no plug anywhere for the relays and the one plug in the back is different. Can you help me get the right wiring?
asked by: Drew
Expert Reply:
The T-One Vehicle Wiring Harness with 7-Way Trailer Connector Item # 118281 is the correct harness for your 2010 Nissan Pathfinder. The plug behind the passenger side kick panel can be difficult to locate because of the bundle of wires in that small area. You may have to pull wires out of the way, just be careful not to pull on them so hard you damage them where they are going into the factory plugs. It may be possible that it is taped to other wires, tucked on the backside.
As far as the plugs at the back of the vehicle, the Pathfinder is going to be very similar to the Frontier as far as plug locations however, they may not be in the exact location. Look for a black plug and a gray plug with caps. They will be located on your driver side frame rail. Should be on the inside but, one could be on the outside of the frame rail similar to where it is on an Xterra.
I have included links to instillation videos for both the Xterra and the Frontier to help you locate the plugs.
On some of the 2010's the plug in the back does not match the plugs on the harness. Due to this, you will have to cut the plug off of the harness and splice the wires together. You will want to test the factory wires to determine the correct functions. Do not rely on colors to match.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Brake Controller
- Shop: T-One Vehicle Wiring Harness with 7-Way Trailer Connector
- Search Results: proportional controller trailer brake controller
- Search Results: 90195
- Search Results: 7 pin trailer harness
- Search Results: 118266
- Search Results: tekonsha 90195 p3 electronic brake control
- Shop: Curt Trailer Connector Adapter - 4-Way to 7-Way RV and 4-Way Flat
- Shop: Mounting Bracket and Installation Hardware - Pollak 7-Pole, RV-Style Trailer Connector - Vehicle End
- Shop: Replacement Idler Head for Solera Power RV Awnings - Regal Style - Black
- Video: All You Need to Know About the Gen-Y 2-Ball Mount for 2" Hitch Receivers
- Search Results: electric trailer brake kit
- Search Results: electric drum brakes
- Q&A: Ball Height for 2-5/16" Hitch Ball on Gen-Y 2-Ball Mount for 2" Hitch Receivers
- Q&A: Trailer Hitch Recommendation with 1,000 lb Tongue Weight Capacity on Ford E-250
- Q&A: Parts Needed to Add Electric Drum Brakes to 6 x 12 Single-Axle Trailer
- Q&A: Adding Electric Drum Brakes to Carry-On Trailer
- Shop: Trailer Wiring Junction Box
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Flat Connectors
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased

