Correct Replacement for Kwikee Step Controller 909506000

Question

Question:

I have a Kwikee step series 32. The control unit, part number 909506000 seems to have failed. The motor still works when given power. I think it was made it 1999, serial number 0619390. Is LC379146 the correct replacement? Or what is the correct replacement?

asked by: Corey M

0

Expert Reply:

The correct replacement for the Kwikee Step Controller 909506000 is the Replacement Control Unit for Kwikee Electric RV Steps part # LC379606.

expert reply by: Conner L

0

Answer 1

I didn't have much luck looking up the sealand 340685 toilet specifically. However, the Dometic 510 Full-Timer RV Toilet #DOM29FR is also called the Dometic Sealand Traveler 510 Series RV or Marine Toilet. There are a number of replacement parts…

view full answer...

Answer 2

I have exactly what you need for your Kwikee 32 Series Steps which I was able to confirm based on the parts numbers you have provided. The correct replacement motor is the Replacement Motor with Mounting Plate for Kwikee Electric RV Steps part…

view full answer...

Answer 3

Yes, I can help you! The correct replacement control module for your Kwikee p/n 909506000 is the Replacement Control Unit for Kwikee Electric RV Steps #LC379606. This fits steps manufactured from 1999 to 2005.

view full answer...

Answer 4

The Kwikee Control Box #909506000 has been discontinued by the manufacturer. The replacement part is determined by the date of manufacture which you can determine by looking at the current part which will have a date on it. If not, you can supply the…

view full answer...

Answer 5

The Replacement Control Unit for Kwikee Electric RV Steps - 2 Door Switch Kits Item #LC379606 is the manufacturer confirmed replacement your current controller for your Kwikee Steps.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

Answer 12

That’s a great question Chadwick, and this is one of those situations where the change in technology really matters. The GE Appliances Low-Profile RV AC w/ Heat Pump part #GE26RR will replace your current ARC13AACBL2 setup, but it’s important to know…

view full answer...

Correct Replacement for Kwikee Step Controller 909506000

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching