Is Demco DM97ZR Jumper Kit Needed with 2021 Renegade Verona 36VSB

Question

Question:

Demco SBS Air Force One Coiled Air Jumper Kit for Freightliner BrakeSync-Equipped Chassis Item # DM97ZR Do I need this and will this jumper kit fit my 2021 Renegade Verona 36VSB with a Frieghtliner M2 chassis? How do I determine if my RV chassis is BrakeSync equipped?

asked by: Dave W

0

Expert Reply:

The Freightliner BrakeSync setup is only available on the 2021 and newer FCCC or custom chassis models which the M2 is not one of. This means you do not need the part # DM97ZR with the Air Force One part # SM99243.

expert reply by: Jameson C

0

Answer 1

No, there is not Gary but congrats on the new truck! All of the baseplates for the 2026 Chevrolet Silverado 1500 replace the factory tow hooks and none of the manufacturers make a removable arm that can be used in replace of the tow hooks. The Blue…

view full answer...

Answer 2

Hey Tom, Both end fittings on that Jumper Kit #DM97ZR are not replaceable, so the fittings would not be able to be changed or converted. Anytime those hoses are damaged the way to replace it is just getting the hose itself. I recommend getting a new…

view full answer...

Answer 3

The Replacement Air Jumper #DM97ZR can be used as a replacement for the jumper that came in the Demco Air Force One Supplemental Braking System for Freightliner Chassis Motorhomes with BrakeSync #DM23MV that you previously purchased with us. The part…

view full answer...

Answer 4

Glad you got it all set up but that's interesting your Rambler's fitting is a different size. The Demco Air Force One item #DM23MV you purchased is specifically designed for the factory BrakeSync fittings. I don't know if yours got…

view full answer...

Answer 5

To determine if your motorhome has the Tiffin air brake setup or Freightliner BrakeSync you'll need to look at the rear and see if there's an quick disconnect fitting for your air line. The standard Tiffin air coupler fitting would look like…

view full answer...

Answer 6

Hey Bill! You can swap out the 4-way for a 6-way and use a 7-way to 6-way adapter which will allow you to add the charge line #DM66VR. The Roadmaster 7-Wire to 6-Wire Flexo-Coil Kit #RM-146-7 has what you need to complete the installation. Where are…

view full answer...

Answer 7

The video's on the wrong page but the pictures are correct for item #SM99726. For the male side you will need the Replacement 1/4" Pushlock x 1/8" MPT Elbow for Demco Air Force One Flat Tow Brake System item #SM18711.

view full answer...

Answer 8

I spoke with my contact at SMI and the piece you are looking for is #SM99625 which is the fitting and the bracket. Or if the bracket is still fine and all you need is the fitting you just need the part #SM99726.

view full answer...

Answer 9

You can use the 1/4" Air Line Hose - SMI Air Force One or Stay-In-Play Duo Supplemental Braking System #DM16114 sold in 1 foot increments, so if you need 6 feet of new hose you can simply select quantity 6 on that product page and you will…

view full answer...

Answer 10

Hi Bill; are you referring to the Replacement Car-Side Pushlock Connector for Demco Air Force One Air Jumper #SM6214? If not, please respond below in the comments. I am also attaching the installation manual for the Demco Air Force One #SM99243…

view full answer...

Answer 11

I've attached a little diagram below from the instructions of the Demco Air Force One Supplemental Braking System w/ Wireless Coachlink #DM26VR that shows how to wire your reed switch. In the 2-wire reed switch setup you will just run the black…

view full answer...

Is Demco DM97ZR Jumper Kit Needed with 2021 Renegade Verona 36VSB

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching