Replacement Hub Drums for AL/KO 8440 and Compatible Brake Assemblies

Updated 03/26/2021 | Published 03/24/2021

Products Featured in This Question

etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs

(247)

$95.79

Easy Grease Trailer Hub and Drum Assembly for 2K Axles - 7" - 5 on 4-1/2 - L44649 - Pre-Greased

(1917)

$114.61

Mounting Hardware for 7" Brake Assemblies

(49)

$6.50

Question:

I have a 2003 Continental dual axle enclosed trailer. The trailer has been sitting in a wet field and I noticed my Al-Ko 8440 drums were falling apart from rust. I am looking for 4 replacements and 4 electric brake assemblies I found in a previous post the brake assembly that works is AKEBRK-2. I am looking for the corresponding drum for AL-KO 8440. Thank you in advance

asked by: Mike B

Expert Reply:

The AL/KO 8440 is a 2K capacity, 7 inch hub drum with a 5 on 5-1/4 inch bolt pattern that uses a L44649 inner and outer bearing and a 10-9 grease seal.

The proper replacement would be the etrailer brand # AKHD-545-2-EZ-2K which is compatible with both E-Z Lube or standard spindles. The bearings, grease seal, races, dust cap, lug nuts and even the grease are included.

These drums are compatible with the # AKEBRK-2 brake assemblies you'd mentioned. You'll also need the # BRKH7 mounting hardware for the brake assemblies.

I've linked to some product videos that you might find helpful.

expert reply by: Mike L