Determining The Correct Replacement Hub For Hammerblow H-1000
Updated 03/17/2021 | Published 03/12/2021
Products Featured in This Question
Question:
Im looking for a replacement hub for a Hammerblow H-1000 5x4.5. Any help would be greatly appreciated. Thanks
asked by: Chris M
Expert Reply:
I would be happy to help you find the correct replacement hub for your Hammerblow H-1000, but you will need to determine which inner and outer bearings your spindle uses as I was unable to find any information on a specific replacement hub for you.
To determine which inner and outer bearing your spindle uses you will want to remove one of your current hubs and look for the bearing numbers stamped in the face of each bearing as shown in the included picture of the # L44649.
If your bearings are worn to the point that you cannot read the bearing numbers you will need to use digital calipers like # PTW80157 to precisely measure your spindle according to the included diagram.
If you can email me the bearing numbers or spindle measurements I would be happy to recommend a replacement hub for you.
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Continue Researching
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Search Results: dust cap
- Q&A: Recommended Grease Caps for 2.04 Inch Diameter Hub Bore on Trailer
- Q&A: What Seals Will be the Correct Replacements for an H-1000 Hub?
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Shop: Trailer Wiring
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Suspension Enhancement
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Article: How to Measure for Trailer Hitch Drop
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Search Results: trailer jack
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Brake Controller
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: trailer wiring
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Search Results: trailer lights
- Q&A: What is the Best Grease for Trailer Bearings
on Hand Tools
