Turnbuckle Camper Tie down Locks

Question

Question:

Hi, do you sell turnbuckle locks for campers?

asked by: Celia P

0

Expert Reply:

The turn buckle locks we offer are the Pin Locks for TorkLift FastGun and Derringer Turnbuckle Item # TLS9500 and TorkLift Tie Down Locks Item # TLS9700. Keep in mind TLS9700 is not compatible with the Talon R Series Tie Downs.

expert reply by: Shane H

0

Answer 1

Unfortunately no, the Pin Locks for TorkLift FastGun and Derringer Turnbuckle Handles #TLS9500 will all use the same key, however the TorkLift Tie Down Locks #TLS9700 will use a different set of keys as they are not able to be keyed alike.

view full answer...

Answer 2

Though we do not have a replacement grommets for the TorkLift pin lock you can purchase The Replacement Pin Lock for TorkLift FastGun and Derringer Turnbuckle Handles #TL11001 which replaces the whole pin lock. The lock will secure the TorkLift…

view full answer...

Answer 3

For a single replacement pin lock for the Torklift Fastguns we have the part #TL11001 which would be what you would need. The #TLA7509 doesn't have a wide enough usable span to work with the FastGuns #TLS9522-2-LK.

view full answer...

Answer 4

The etrailer Trailer Coupler Latch Lock part #e98889 is very similar to the Pin Lock for TorkLift GlowStep Scissor Steps part #TLA7509 so you should be able to swap the two without issue. The etrailer lock is threaded unlike the TorkLift so there…

view full answer...

Answer 5

Hey Ash, thanks for reaching out. That’s a solid build you’re putting together. For a Northern Lite 10-2 on a CM flatbed with a Ram 5500, you’re going to want the short TorkLift FastGuns #TLS9520. On flatbed setups like yours, the tie-down points are…

view full answer...

Answer 6

Hey Paul! The short range FastGun Turnbuckles are designed for bed-mounted tie-downs and I would definitely listen to what Kingstar recommends. These are only available in pairs and you will need a pair for the front and rear. You can choose from the…

view full answer...

Answer 7

For a single replacement Pin Lock you will need part #TL11001. It is a direct replacement for your pin lock with the key P01. My contact at TorkLift verified that all of them are keyed alike so you will not have to give any specific part numbers when…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

I checked with Torklift and the correct tie downs for your 1995 Ford F-350 that has running boards that run under the bed of the truck are part #TLF4000 and #TLR3501.

view full answer...

Answer 10

Hey Jimmy! The TorkLift ApexAnchors Truck Camper Tie-Downs #TL76SV do require specific turnbuckles. What you need are the TorkLift FastGun Apex Truck Camper Turnbuckles #TL88SV. This is just the front set of tie-downs so for the rear you need the…

view full answer...

Answer 11

Hey Fred, you would need the Toyota harness part #PT725-48241 but this is not a complete trailer wiring harness. This is basically an intermediate harness that the Curt #C55245 needs if the Grand Highlander does not have the OEM tow package. I would…

view full answer...

Turnbuckle Camper Tie down Locks

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching