Opening of Eclipse Magnetic Mounting Bracket 306-X6019

Question

Question:

Item 306-x6019 eclipse magnetic bracket. What are the dimensions of the slot in the bracket?

asked by: Steven J

0

Expert Reply:

I checked with EcoHitch and the opening of the Eclipse Magnetic Mounting Bracket # 306-X6019 is 5/16 inch.

expert reply by: Jameson C

0

opening dimension
(click to enlarge)

Answer 1

The Curt T-Connector Vehicle Wiring Harness part #C56274 is listed as a fit for a 2021 Jeep Renegade, all models so there are no fit exclusions for certain features. Therefore, so long as the LEDs are factory there will be no problems with the Curt…

view full answer...

Answer 2

We actually do have a trailer hitch for your 2019 Nissan Leaf with the EcoHitch Hidden Trailer Hitch Receiver #306-X7221! This trailer hitch comes with a 2" receiver and features a hidden crosstube (so only the receiver is visible) so that it…

view full answer...

Answer 3

The best hitch for a 2023 Jeep Renegade is the etrailer Hitch item #e37AR. This hitch is custom fit and bolts to your Jeep with included hardware. This is our house brand hitch but it is manufactured by Curt and is identical to their item #C13269…

view full answer...

Answer 4

The EcoHitch Hidden Trailer Hitch Receiver #306-X7320 is the only hitch available for your 2019 Kia Sorento LX that features a hidden crossctube design. It has a towing capacity of 3,500 lbs and a tongue weight rating of 525 lbs which should work…

view full answer...

Answer 5

Yes, it is accurate. The Curt Trailer Hitch item #C13382 is confirmed to fit all models of the 2024 Subaru Crosstrek except for the hybrids. There was a customer that recently installed this on a 2024 with no issues back in May and he sent me in a…

view full answer...

Answer 6

For your 2020 Hyundai Palisade Limited edition you will need a wiring kit to transfer the light signals to your trailer, the pre-wiring provides a plug for the trailer wiring to hook up. I recommend Curt T-Connector Vehicle Wiring Harness #CU94FR. It…

view full answer...

Answer 7

I would try to install the No-Drill Mount for Electrical Mounting Bracket part #18140 on the underside of your Draw-Tite Max-Frame Trailer Hitch Receiver part #76138, similar to what you see in the attached photo. The bracket may also need to be bent…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Opening of Eclipse Magnetic Mounting Bracket 306-X6019

Product Page this Question was Asked From

Continue Researching