Correct Safety Chains for Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Adapter Pin Box

Question

Question:

I am interested in your 5th wheel conversion kit. My question is can I get the chains as well? it doesn’t say if it comes with them. Thank you

asked by: Danny O

0

Expert Reply:

The Tow Ready Safety Chain Kit with Clevis Hooks part # 49150 is what we recommend using with the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Adapter Pin Box part # GY36FR. The safety chains are not included.

expert reply by: Conner L

0

Answer 1

As long as you're not using too high powered of a magnet to affect the monitor of the TireMinder i10 TPMS for RVs and Trailers w/ Signal Booster #TM89FR you shouldn't have any interference reception-wise.

view full answer...

Answer 2

Carl, great question - and yes, anytime a fifth-wheel trailer is converted to a gooseneck-style connection, chains are required. Even though the Nomad bolts to your trailer in place of the pin box, the truck connection is now a gooseneck ball, so it…

view full answer...

Answer 3

Hey Terry! Safety chains like the Gen-Y #GY49GR you looked at will work with the MORryde GooseTech 5th Wheel to Gooseneck Pin Box #MR99MV. The safety chain slot can handle 3/8" or 5/16" so either size will fit. MORryde actually came out…

view full answer...

Answer 4

Hey Joe, the Curt Safety Chain Loops part #C60617 that you referenced are compatible with the Gen-Y safety chains part #GY49GR.

view full answer...

Answer 5

Sorry to hear about the troubles you're experiencing! Since your Furrion Chill Replacement RV Air Conditioner for Coleman Setup #FR42PV is not switching on at all, that usually means one of 3 things. 1. The voltage is too low - In this case,…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 11

Hey Jeff! The MORryde GooseTech 5th Wheel to Gooseneck Pin Box #MR97MV comes with a Demco eZ-Latch. The best option for a lock is the InfiniteRule Lock for Cast Demco eZ-Latch Trailer Couplers #IR66FR. This is designed to for a standard coupler but…

view full answer...

Answer 12

Hey Stephen, if you were wanting to go with an Andersen Ultimate fifth wheel hitch best option would be the part #3220 which is designed to attach to a gooseneck ball. So then for a gooseneck ball you would want the Curt #C38CR which was designed to…

view full answer...

Correct Safety Chains for Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Adapter Pin Box

Continue Researching