Availability of Dexter 23-105 6k Trailer Brake Assembly

Question

Question:

Hello I need replacement brake assembly for this Dexter number 23-105-00 Left hand 8418 080404 Thanks

asked by: Dan S

0

Expert Reply:

The brake assembly you are in need of is the part # 23-105 which is a left hand brake assembly for a 6k axle.

expert reply by: Jameson C

0

Answer 1

You're welcome Scott! For a 6,000 lbs self adjusting brake assemblies you will want the Dexter Nev-R-Adjust Electric Trailer Brakes item #23-458-459. If you need new mounting bolts and hardware item #BRKH12 will get you set up.

view full answer...

Answer 2

For your Coachmen Camper you are going to want the Dexter Electric Trailer Brake Kit #23-105-106 for an exact replacement to both the left and right brake assemblies that you currently have. Our part number dropped the -00 at the end. The Dexter…

view full answer...

Answer 3

Trailer Brake Assemblies #23-106 and #23-105 are the same brake assembly for the right and left sides, respectively. That's the reason for the difference in part numbers. They're 12 by 2 inch brakes for 6,000 pound axles.

view full answer...

Answer 4

If the assemblies #23-105-106-09 that you have are held on using 5 bolts instead of 4 the assembly part #23-180 will fit as a replacement since it uses a 5 bolt mounting bracket and is 12 inches in diameter.

view full answer...

Answer 5

For your Dexter 12x2" Brakes, you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for the right side, and #AKEBRK-7L-SA for the left side, as a replacement.

view full answer...

Answer 6

Due to a few factors it's going to be a better option to just replace the brake assemblies with new ones. Biggest reason is that the price difference between new assemblies and shoes is pretty small so you would end up with all new components for…

view full answer...

Answer 7

The Electric Trailer Brake Kit part #AKEBRK-7-SA (part #AKEBRK-7R-SA + part #AKEBRK-7L-SA) will work with pretty much any electric brake controller on the market so there should not be any concern in regards to that aspect. You may however want to do…

view full answer...

Answer 8

The only difference between the Dexter Electric Trailer Brake Kit part #23-105-106 and Dexter Electric Trailer Brake Kit part #23-105-106-09 is fit. The former works on Dexter or Lippert axles with a five bolt bracket mounting flange whereas the…

view full answer...

Answer 9

Yes the Dexter brake assemblies part #23-180-181 would work in place of the #23-105-106. They are the same size and the capacity range matches as well.

view full answer...

Answer 10

The replacement brakes for your Dexter electric trailer brake assemblies, are the Dexter Electric Trailer Brake Assembly # 23-105 for the left hand side, and the Dexter Electric Trailer Brake Assembly #23-106 for the right hand side.

view full answer...

Answer 11

Other than both brake assemblies being a 12x2 inch for a 6K axle, there are several differences between the two brake assemblies. Brake assemblies are either right or left side of the trailer specific. The #23-458 is for the left side of a trailer…

view full answer...

Answer 12

The etrailer.com Electric Trailer Brake Assembly - 12" - Left Hand - 5,200 lbs to 7,000 lbs #AKEBRK-6L will definitely be a good replacement for a Dexter #23-105 brake assembly. This will have the exact same diameter, width, and bolt pattern so…

view full answer...

Availability of Dexter 23-105 6k Trailer Brake Assembly

Product Page this Question was Asked From

Continue Researching