1 3/8 Inch Trailer Seals for Custom Axles

Question

Question:

I have a homemade 3/4 axle with 1 3/8 bearings. I also have a 5/8 axle with 1 3/8 bearing. Do you have seals that would fit either or both of these? thanks! Boone

asked by: Boone D

0

Expert Reply:

Grease seal set # BB60005 has an inner diameter of 1.375 (1 3/8) and an outer diameter of 1.980. These should work for both of your trailers.

expert reply by: Clayton O

0

Answer 1

For a replacement of the NOK AB1990E grease seal you'll need the Grease Seal #13194.

view full answer...

Answer 2

Hey Jeff, based on the dimensions you took the only seal we offer that will work is the Bearing Buddy #BB60005. Actually the Bearing Buddy seal mentioned is for grease applications so that would be the lube type you'd need use.

view full answer...

Answer 3

Based on the dimensions listed we have the bearing kit part #BB60001 which has an outer diameter of 1.980 inches and an internal diameter of 1.375 inch. You'd want to use a digital caliper like #PTW80157 to verify that your dimensions are the…

view full answer...

Answer 4

Hello again Steve; sorry for the trouble, sometimes our system doesn't play nice with pictures. I'm not seeing any calipers or rotors in the parts diagram there, only standard idler hubs. I can tell you that the bearings are #L68149 and…

view full answer...

Answer 5

I do have an option for you but you will need to convert from oil to grease since they don't make stuff for oil in this size anymore. That said, I can confirm based on the info you provided that you need to use part #L44649 for the outer bearing…

view full answer...

Answer 6

The bearing part #L44649 has an inner diameter of 1.063 and is typically used in 3,500 lb axle hubs and the #L44643 has an inner diameter of 1 inch and is typically used on 2,000 lb axle hubs. If you can get me more info on your trailer like axle…

view full answer...

Answer 7

The closest option we have would be the part #BB60001 which has an inner diameter of 1.375 inches and an outer diameter of 1.980 inches.

view full answer...

Answer 8

The Spindle Grease Seal Set #BB60001 is specifically designed to fit on your 1" straight spindle using a Bearing #L44643 and 1.980 Bearing Buddy like Set #BB1980A-SS. The seal set includes 2 smooth stainless steel rings, 2 O-rings and 2 grease…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

1 3/8 Inch Trailer Seals for Custom Axles

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching