Taillight Recommendation for F008585-2 Fulton Trailer Fender

Question

Question:

Fulton Single Axle Trailer Fenders with Top and Side Steps - Black Plastic - 15 Wheels - Qty 2 Item # F008585-2 can you recommend a waterproof combination trailer light that I could attach to this fender? thanks!

asked by: Peter K

0

Expert Reply:

We don't offer a taillight specifically designed for use with the # F008585-2 fenders you'd looked at, but I've seen folks use taillights like the # STL78RB mounted to the rear of the fender step as shown in the provided photo. You'd then need to devise a way of mounting and illuminating the license plate if you were to go that route. You could bend a slight radius on the license plate and actually mount it vertically to the rear face of the fender as shown in the provided photo. You'd then need a license plate lamp like # LPL31CB mounted to the side of the trailer pointing downward to the plate.

expert reply by: Mike L

0

Taillight Placement on F008585-2 Fender
(click to enlarge)

Answer 1

I'd be happy to help you with that. For starters, the #F008584-2 fenders you'd looked at are designed for 14 inch wheels, you'd be better served going with the #F008585-2 which are designed for 15 inch wheels like the ones you have.…

view full answer...

Answer 2

Based on your trailer tire size the Fulton Trailer Fenders part #F008585-2 would work very well for you. To see a chart with the fender dimensions see the attached picture.

view full answer...

Answer 3

To replace the fenders on your trailer with the Fulton black trailer fenders, #F008585-2, you will need to either reuse the old hardware or you will have to fabricate some hardware. If the old hardware cannot be used, a visit to a hardware store will…

view full answer...

Answer 4

No worries. I have seen fenders in much worse shape. It looks like the best option is going to be the fenders that you have referenced #CE17900G. I know that this fender does not have mounting holes. But that is because they are a universal fit item…

view full answer...

Answer 5

Not necessarily. I don't have the ability to look up which fenders your trailer left the factory with, but I might be able to assist you in finding something similar. You'd want to measure your existing fender and see if anything we offer…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Taillight Recommendation for F008585-2 Fulton Trailer Fender

Products Featured in This Question

Continue Researching