See what our Experts say about this CE Smith Trailer Fenders

• Can CE Smith Single Axle Trailer Fender Bolt Directly On Side of 2017 R-Pod 179
  Hey Don! The sides of the # CE17900G are slightly rounded but you can still bolt it directly to the wall of your 2017 R-Pod 179. I attached a picture below showing where another customer was able to attach it directly to the side of his trailer so you will be able to do the same on yours (although I don't recommend mounting it off-center like in the picture). What happened to your original fender?
  view full answer...
• Replacement Fenders for Forest River R-Pod
  I am sorry Mike but we do not sell custom fit fenders for your Forest River R-Pod. The absolute closest thing I could offer would be the CE Smith Single Axle Trailer Fender item # CE17100ATB. It measures 10" Wide x 32" long x 16" tall and is made of 14-gauge aluminum. This has the standard diamond plate finish that it looks like your R-Pod came with from the pictures I can find online. You would get this fender mounted up using the Mounting Brackets for Trailer Fender item # CE26098G-2.
  view full answer...
• Recommended Trailer Axle Fender for 15" Diameter Wheels
  Hey Austin, thanks for dropping by! Unfortunately the CE Smith Single Axle Trailer Fenders # CE17960ATB will only wheels up to 13" in diameter so your 15" wheels are going to be too big, Instead, you'd have to use the CE Smith Single Axle Trailer Fender # CE17900G, which can work with 14" or 15" diameter wheels. If there is anything else I can help with, please feel free to drop a comment and let me know!
  view full answer...
• Recommended Replacement Fender For A 2018 Forest Rover R-Pod RP-179
  While we don't currently carry any black fenders that would match your 2018 Forest Rover R-Pod RP-179 fenders we do offer the CE Smith Single Axle Trailer Fender # CE17900G which can be painted black and mounted onto your trailer.
  view full answer...
• Recommended Replacement Fender For A Pace American JT610SA Enclosed Trailer
  You Pace American JT610SA enclosed trailer should have a single axle with 14" wheels so the CE Smith Single Axle Trailer Fender # CE17900G would be a great replacement. We don't carry the diamond plating that you need but you can find these at your local hardware store.
  view full answer...
• Replacement Fender for 2017 Forest River R-Pod 179
  The part # CE17900G is a good option but we also have the part # CE17960ATB which is 9 inches wide, 28 inches long, and 16 inches tall. It's an aluminum tread plate design.
  view full answer...
• Replacement Fenders for 2011 Forest River R-Pod RP-177 Travel Trailer
  We do offer many styles of replacement trailer fenders in plastic, steel and aluminum that you can check out on the page I linked for you. To start, click on your wheel diameter. I reviewed many photos of the 2011 RP-177 and it appears that the steel fender part # HP79VR which fits 13-inch and 14-inch wheels is a good match. This has no lighting/wiring, please note. It measures 28L x 10H x 7-3/4W. The other closest match is part # CE17920 which measures 28-1/2L x 13H x 9W. All of these...
  view full answer...
• How To Measure a Boat Trailer Fender Without Removing the Wheel
  I can understand that if your boat is loaded on the trailer, you don't want to remove one of the wheels to measure the fenders. Measuring a fender with the tire still mounted can be tricky, but it's not impossible. I've provided a diagram that should be helpful. You already know how to measure the width. To get the length it is easiest to tape a piece of stiff paper to the end of each fender edge that will protrude past the wheel. Then measure between the papers. For the height, you can...
  view full answer...
  
• Replacement Trailer Fenders for Car Tow Dolly Trailer with 14 Inch Wheels
  No worries. I have seen fenders in much worse shape. It looks like the best option is going to be the fenders that you have referenced # CE17900G. I know that this fender does not have mounting holes. But that is because they are a universal fit item and you will need to provide your own hardware for mounting. We do have some mounting brackets you can use, # CE26098G-2. I have also included a link to all of the fenders that we carry that fit 14 inch wheels. Fenders, unless otherwise noted,...
  view full answer...
  
• Recommended Round Trailer Fender and Lights for 14 Inch Wheels on 2016 Forest River R-Pod Trailer
  No photo came through, so I did a little research on your trailer to attempt to get the missing visual. I recommend the CE Smith Single Axle Trailer Fender- 14" Wheels - Qty 1 # CE17900G for your 2016 Forest River R-Pod 180. It will need to be primed and painted black to match your trailer or powder coated like the original fender. You may want to consider the mounting brackets # CE26098G-2 if your mounts were damaged as well. For the marker lights, I don't know the size you need,...
  view full answer...
• Replacement Galvanized Steel Fenders For a 1998 Escort Single Axle Boat Trailer
  Here is a list of our single axle boat trailer fenders which are galvanized. You will need to verify which will work best on your 1998 Escort boat trailer. CE Smith Single Axle Trailer Fender 8" Wheels # CE17700G CE Smith Single Axle Trailer Fender 12" Wheels # CE17701G CE Smith Single Axle Trailer Fender 13" Wheels # CE17800G CE Smith Single Axle Trailer Fender 14"-15" Wheels # CE17900G
  view full answer...
• Fenders for Utility Trailer with 24 Inch tires
  Generally tires on 14-1/2 inch rims are several inches larger than that in diameter. Tires that are 24 inches in diameter are usually closer to a 13 inch rim. So that is unique. I suggest using something like the steel fender # CE17900G for 14 inch wheels. It's 31-1/2 inches wide at its largest opening. You want about 3 or 4 inches from the tread of the tire to the inside of the fender. Since your tires are 24 inches in diameter this will give you about 3-3/4 inches. I've attached...
  view full answer...
• Slant Back Trailer Fender for 14 Inch Wheels With Corrosion Resistance
  The Single Axle Trailer Fender - Slant Back - Driver Side - 14" Wheels - Qty 1 # HP38VR you referenced is both the driver and passenger side fender, but is made out of standard steel not stainless. If stainless steel is important to you then my recommendation is to use the Single Axle Trailer Fender - Slant Back - Stainless Steel - 14" Wheels - Qty 1 # HP98VR with mounting brackets # CE26061G-2 or to use the CE Smith Single Axle Trailer Fender - Pre-Galvanized Steel - 14" and 15" Wheels...
  view full answer...
• Plastic Fenders for 14 Inch Tires on Boat Trailer
  There are a host of plastic fenders available for 14 inch tires, with our most popular being the CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Black Plastic - 14" Wheels # CE19504-2. If you want to paint your fenders, you would want to use a steel fender such as the CE Smith # CE17900G. I have added a link to our page with each of the fenders we have which will fit 14 inch wheels for you.
  view full answer...
• Recommended 31-1/2
  I have attached a link to our selection of trailer fenders that fit the description that you gave me. The fender that I recommend getting which is about 31-1/2 inches long, outside to outside, and is compatible with 14 inch wheels is the CE Smith # CE17900G. I recommend this fender over the other options because it comes pre-galvanized which means the steel will last longer and be better protected against the water that it will be exposed to on your boat trailer. Since we do not currently...
  view full answer...
• Replacement Red and Amber Clearance Light Recommendation for Top of Trailer Fender
  Thank you for reaching out and providing a photo! To install that same style of light on the CE Smith Single Axle Trailer Fender # CE17900G I recommend checking out the Incandescent Trailer Fender Light w/ Reflector which comes as part # BA44FNL for the driver side and part # BA44FNR for the passenger side. This is a similar style and also gives you the red and amber lights you're looking for. If you'd like to look at some other style we have I'm linking our selection of this style of...
  view full answer...
  
• Replacement Fender for 2009 Yacht Club Galvanized Trailer
  Unfortunately your photos did not come through. I can help you with a single tire fender, but we don't carry any tandem axle fenders. It sounds like you are looking for galvanized steel fenders, so here are those options: CE Smith Single Axle Trailer Fender - Pre-Galvanized Steel--- 8" Wheels # CE17700G 12" Wheels # CE17701G 13" Wheels # CE17800G 14" and 15" Wheels # CE17900G 15" Wheels # CE17937G Then we have the Mounting Brackets for Trailer Fender - 13"/14"/15" Wheels - Galvanized...
  view full answer...
• Can Weld-On Fenders Be Bolted In Place
  The lip at the rear of the # CE17900G fender is just under an inch wide, so it could be drilled and bolted, but you might find the task easier if you used part # HP36VR. The fender back will stiffen the fender, and provide much more surface for securely bolting it to the trailer. I've linked to some product description videos for the fenders mentioned above.
  view full answer...
• Option to Replace 9 inch Wide Fender 16050-J on Boat Trailer
  From what I could find, your 16050-J fender is 9" wide x 16-1/2" tall, but you'll want to verify that, as well as the overall length in order to find the best replacement. The CE Smith Single Axle Trailer Fender - Pre-Galvanized Steel - 14" and 15" Wheels # CE17900G is 9" wide x 13" tall and measures 31-1/2" long, so compare that to what you have. For a taller fender that may be a better option due to its 32" long x 9" wide x 16" tall measurement, there is also the CE Smith Single Axle...
  view full answer...
• Trailer Fender for 14"-15" Wheels
  The Single Axle Trailer Fender # HP79FR is for the passenger side only. This is because the slant-back design makes each model specific to one side or the other. It looks like this fender is being phased out by the manufacturer. We only have the passenger side in stock, so that's why the driver side version of this fender is not available. I recommend that you use a symmetrical fender that can be used on either side, such as the CE Smith Single Axle Trailer Fender # CE17900G. This is...
  view full answer...
• Can Fulton Single Axle Trailer Fender For 14 Wheels be Painted?
  The Fulton Single Axle Trailer Fender # F008594 can be painted but it won't last long due to the polyethylene plastic it is made from so it is not recommended. The best option, if possible, would be to use a steel fender such as the CE Smith Single Axle Trailer Fender # CE17900G which works with 14" wheels like the Fulton and is 31-1/2" long.
  view full answer...
• Recommended 33" Steel Fender for Trailer
  Hey Vince, it looks like the closest I was able to find to what you're looking for was the CE Smith Single Axle Trailer Fender - Pre-Galvanized Steel # CE17900G which measures 31-1/2" long x 9" wide x 13" tall, and the Replacement Single Axle Trailer Fender for Malibu Boats Trailers # HP33VR which measures 32" long x 9" wide x 15" tall. If you let can let me know specifically what trailer you're needing a replacement for, I'd be happy to check and see if we carry it.
  view full answer...
• Recommended Paint for CE Smith Pre-Galvanized Steel Fenders
  The CE Smith Single Axle Trailer Fender - Pre-Galvanized Steel - 14" and 15" Wheels - Qty 1 # CE17900G are designed to be primed and then painted for corrosion resistance. This also gives you the option to match or accent your trailer colors. Some people have chosen to simply use clear coat paint to keep the metal appearance. For paint, I recommend using an oil-based protective enamel paint like Rust-oleum in the color of your choosing or the clear. This is used over the base primer...
  view full answer...
• Does Galvanized Trailer Fender # CE17900G Need to be Painted
  A pre-galvanized fender like the part # CE17900G would not have to be painted. The zinc coating will do a great job preventing corrosion. Painting on top of that certainly wouldn't hurt but it would not be necessary.
  view full answer...

Do you have a question about this Trailer Fender?