Can I Use Any LED Light Bar with the LED Light Mounting Brackets for Rhino Rack HD or Aero Crossbars

Question

Question:

I’m interested in the heavy duty rhino bar but not interested in using the light bar shown with the bar. Do you know what others brands or mounting options will work?

asked by: Jerry

0

Expert Reply:

You can use the LED Light Mounting Brackets for Rhino-Rack Vortex Aero and Heavy-Duty Crossbars # RR43174 to mount any brand of LED light bar on the Vortex Aero or HD crossbars. They are brand specific to the types of crossbars, but not the light bar, so even if you already have a light bar these will work on it.

expert reply by: Erik B

0

Answer 1

The light bar in the linked review video for the Rhino-Rack LED Light Mounting Brackets #RR43174 that you referenced is the MaxxTow Off-Road Light Bar #MT80634. This receives its power from hardwiring and comes with a switch for easy and simple…

view full answer...

Answer 2

The LED Light Mounting Brackets for Rhino-Rack Vortex Aero and Heavy-Duty Crossbars #RR43174 are going to be 3.9" wide,1.77" tall, and 5.5" long. I have also attached a diagram depicting these measurements for you to check out as…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

Hi Bruce! The Access Toolbox Edition Soft, Roll-Up Tonneau Cover #A63FR will indeed fit your 2021 GMC Serra 1500 SLT with the short bed and your toolbox. This can be used with toolboxes that measure 19" to 21" long, so you are good to go!…

view full answer...

Answer 9

Hi Edward, thanks for reaching out. This is a good question, and you’re thinking about it the right way. GM requires the battery to be disconnected when flat towing vehicles like your Suburban because the electronic parking brake can self-activate…

view full answer...

Answer 10

We do have some replacement parts, it looks like you have the Hanger Bracket - #92925 (piece 22) but may be missing some of the hardware needed to mount it. Hanger Bracket Wing Nut - #92927 (piece 25) Leg Bracket Wing Bolt - #92929 (piece 27) I have…

view full answer...

Answer 11

Hey Zakery, Since the Denali package has Adaptive Ride Control the only option for your 2021 GMC Sierra 1500 Denali would be the Firestone Ride-Rite Air Helper Springs #F2609. These springs install on the frame in the same location as most fifth…

view full answer...

Can I Use Any LED Light Bar with the LED Light Mounting Brackets for Rhino Rack HD or Aero Crossbars

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching