Can the Trailer Valet RVR9 Remote Controlled Trailer Dolly Move a Trailer Up and Incline

Question

Question:

Hi will the rvr9 handle a slight upward incline?

asked by: Steve T

0

Expert Reply:

The Trailer Valet RVR9 Remote-Controlled Trailer Dolly # TVRVR9 can be used to move your trailer up slopes or inclines of no more than 5 degrees, so as long as it's not sloped more than that it will be able to handle this without issues. When using the RVR robot to move your trailer up an incline, the RVR must push the trailer up the slope. When going down an incline, the RVR must lead, or pull, the trailer down the slope- so this should be taken into consideration during use.

I've linked some review videos of this dolly that show it in action that you might want to check out, as well.

expert reply by: Erik B

0

Answer 1

Hey Tom! Great question. The Parkit360 Force Electric Trailer Dolly #PA96VR (5,000 lbs) and #PA46VR (10,000 lbs) will work on an incline. However, if the grade is more than 6% you cannot use the dolly. As long as your driveway is no more than a 6%…

view full answer...

Answer 2

The Trailer Valet RVR9 Remote-Controlled Trailer Mover #TVRVR9 is a 4-motor device. There are other versions of this unit that use fewer motors but this one has 4. The maximum surface slope compatible with this device is 5 degrees. I did confirm this…

view full answer...

Answer 3

Hey Brian. The Trailer Valet RVR3 item #TVRVR3-BB225, you were looking at, is actually smaller than your Trailer Valet RVR5 item #TVRVR5. It's going to do even worse job on gravel plus it's way under-capacity for your 2023 Airstream Flying…

view full answer...

Answer 4

If the incline is slight and the gravel isn't super deep the Trailer Valet XL part #TVXL25 would work. But if you have a steep driveway and/or deep gravel the wheels of the Valet are going to spin. In the video I attached a link to we show the…

view full answer...

Answer 5

The Trailer Valet XL Trailer Dolly part #TVXL25 does not come with a drill bit #TVDA to move the trailer valet easier than before but the speed of the movement depends on the weight of your trailer and the environment as well as your drill. It works…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 12

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Can the Trailer Valet RVR9 Remote Controlled Trailer Dolly Move a Trailer Up and Incline

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching