Trailer Valet VS Average Jack Video

Yes the Demco A-Frame Trailer Coupler #DM14793-97 could be welded instead of bolting it to the trailer. Instead though I would recommend the #DM14793-52 which isn't primed so would be a bit easier to weld.

The Demco A-Frame Trailer Coupler part #DM14793-97 is designed for a standard a-frame trailer with a 50 degree angle. This is the most common type so there really shouldn't be any other issues that affect fit. That said, I have attached…

Since you will be at a campground the best way for you to move an enclosed motorcycle trailer is a dolly and a great option is the Trailer Valet 5X Swivel Jack and Trailer Mover #STC-V211 because it is a combination jack and dolly that has rubber…

The mounting bracket for the #TV34FR is actually identical to the bracket on the #TV64FR that you were looking at. The holes are 1" apart on center vertically, and 5-1/2" apart horizontally. I have attached a picture for your…

To verify that the Trailer Valet JXC Trailer Jack #TV54FR will fit your 2018 Nucamp Tab400 you will need to verify that the opening for the a-frame jack on your Tab has at least a 2-1/4" opening. The JX2#TV54FR is enough for your Tab as…

The Trailer Valet RVR12 Remote-Controlled Trailer Dolly #TV59FR battery is not removable from the rover itself. Only the batteries from the remote can be removed and replaced. This is their heaviest duty unit which would work best in a commercial…

The Trailer Valet JXC Trailer Jack w/ Footplate and Drill Powered Option #TV54FR had just switched to using the round mounting plate over the triangular mounting plate. We have updated our pictures to match the new product but there are a couple…

The Furrion Vision S Wireless RV Observation Camera System with Side Marker Light Cameras, #FCE48TASL-05 is to be installed using the yellow wire for turn signal trigger and you will need to be in multiple screen mode setting.

You can pretty easily separate the camera from the taillight on the Furrion Vision S Side Camera w/ Marker Light Bracket #FCE48TASL that you referenced. I attached a picture of what that looks like. There isn't a cover though for this…

Thank you for your purchase from etrailer of the LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems #FCE48TASL. The yellow wire is the trigger wire which you can connect to your turn signals if you want the camera to…

The most common way to install the side marker cameras part #FCE48TASL is with the camera above the light like in the picture I attached.

I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…