Will Curt # C24HR Hitch Disrupt Distance Sensors or Liftgate Sensor?

Question

Question:

ONCE THE HITCH IS INSTALLED FOR THE NEW 2021 ROGUE, WILL IT DISRUPT ANY OF THE DISTANCE SENSORS OR AUTOMATIC LIFTGATE SENSOR?

asked by: RON E

0

Expert Reply:

I reached out to my contact at Curt Manufacturing about the Curt # C24HR hitch for the 2021 Nissan Rogue and what possible issues there may be with the operation of the liftgate sensor or the rear distance sensors. They told me that those Rogue systems should work as expected. They have not had any consumer reported problems. The hitch is further inside of the sensors so they would not be blocked by the hitch structure. Regarding the liftgate sensor, users can expect to find "the sweet spot" just left of the receiver opening. I did see a Curt internal video where the liftgate was operated by an installer on a 2021 Rogue by putting the foot just left of the receiver.

expert reply by: Les D

0

Answer 1

The best hitch for your 2021 Nissan Rogue SL is going to be the etrailer Hitch item #e93ZR. This is a class III hitch with a 2" receiver and it is definitely compatible with your Thule Helium Pro Bike Rack item #TH9043PRO. I have linked an…

view full answer...

Answer 2

That hitch does stick out pretty far on your 2021 Nissan Rogue! I can certainly understand wanting something a bit more recessed. We have the Curt hitch #C24HR which is much more recessed like you can see in the picture I attached. I could be wrong…

view full answer...

Answer 3

Just a single difference exists between the Curt and etrailer trailer hitches for your 2024 Nissan Rogue, which is the finish. The etrailer hitch has a matte black finish, while the Curt hitch has a glossy black finish, so you can choose which you…

view full answer...

Answer 4

To add a hitch to a 2023 Nissan Rogue Platinum, I recommend the etrailer Hitch item #e93ZR. It is custom fit and bolts to your Nissan with included hardware. I have attached an installation video below along with a couple of pictures so you can see…

view full answer...

Answer 5

The Class III hitches we have for your 2022 Nissan Rogue include the Draw-Tite #DT85MR and the Curt #C24HR. I recommend going with the Draw-Tite over the Curt because it sits about 1/2" higher off the ground and the center of the hitch pin hole…

view full answer...

Answer 6

Hey Jelmer, it looks like your 2022 Nissan Rogue SV has a towing capacity of 1,500 lbs meaning that the tongue weight would between 110 lbs - 225 lbs (10-15% of max towing capacity), so you're going to want to follow whatever your actual tongue…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

We sure do Rob and congrats on the new SUV. To add a hitch to your 2026 Nissan Rogue, I recommend the etrailer item #e93ZR. This hitch is custom fit for your Rogue and comes with all hardware necessary for installation. The crosstube mounts entirely…

view full answer...

Will Curt # C24HR Hitch Disrupt Distance Sensors or Liftgate Sensor?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching