Overall Height of the 4 Inch and 6 Inch Ultra-Fab Class A Skid Wheels

Question

Question:

I will Be mounting this on a cargo trailer. I need to know the overall height from the mounting plate to the bottom of the wheel For the 4inch model and the 6inch model

asked by: Michael

0

Expert Reply:

The distance from the top of the mounting plate to the bottom of the wheel on the Ultra-Fab 4 Inch Skid Wheels, # UF48-979011, is 5-3/4 inches and for the 6 Inch wheels, # UF48-979013, 7-3/4 inches. I have attached a photo for you showing these measurements.

expert reply by: John H

0

click to enlarge

Answer 1

I went out into our warehouse and pulled a set of the Ultra-Fab Rotating, Hitch Mounted Skid Wheels #UF48-979014 and found that the distance from the bottom of the wheel to where the bottom plate will be is 5-3/4 inches. Since the bumper you plan to…

view full answer...

Answer 2

For your 18 foot trailer I really like the frame mount skid wheels that can swivel. For that the Ultra Fab kit part #UF48-979011 that you referenced would be your best option. I attached a picture that shows these attached to a trailer frame as well.…

view full answer...

Answer 3

In order to choose the correct set of skid wheels you'll need to measure the square body on the trailer hitch and then choose the correct ones based on that. The Ultra-Fab Hitch Mounted Skid Wheels part #UF48-979017 for example are designed for a…

view full answer...

Answer 4

I checked with Roadmaster and the part #RM-200023-50 will fit your Defender part 4700 as long as the strut you have is 20-1/2 inches.

view full answer...

Answer 5

In order to replace the Replacement Gas Struts part #RM-200023-50 on your Roadmaster Tow Defender Protective Screening part #RM-4750 you will first need to obtain a pick tool or a simple flathead screwdriver will suffice. Once you have this you will…

view full answer...

Answer 6

Hey Mark, The Replacement Gas Strut for Roadmaster Tow Defender #RM-200023-50 is a 65lb gas strut.

view full answer...

Answer 7

Sounds like you have the Roadmaster Tow Defender #RM-4750 which means for a replacement screen you'd need the #RM-4750-10. Then for the replacement shock you'd need the part #RM-200023-50 and you'd be set.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 11

Hey Jason, whenever available I would recommend going with the channel attachment for roof rack accessories including the Thule Hullavator part #TH898 as its simpler stronger, and it's basically the future of most roof rack accessories as it…

view full answer...

Answer 12

Hey Michael, you will want to go with a set of skid wheels for your motorhome like the Ultra Fab #UF48-979012 which will prevent the dragging. These attach to the frame and roll instead of dragging. Where are you dragging the most?

view full answer...

Overall Height of the 4 Inch and 6 Inch Ultra-Fab Class A Skid Wheels

Continue Researching