Will Extang Replacement Hinge Replace Gator SFX Tonneau Cover Hinge?

Question

Question:

Do you know if part EX1032 will Fit a Gator sfx cover

asked by: Larry S

0

Expert Reply:

The Extang # EX1032 replacement hinge that you referenced is made for Extang Trifecta and Extang eMAX folding tonneau covers as a hinge replacement. I reached out to my contact at Extang and found out that they also make the Gator covers and that this hinge will work with Gator brand covers!

expert reply by: Les D

0

Answer 1

We do not offer any replacement parts that directly are for your Gator tonneau cover, however Extang also made Gator covers so their tailgate hinge #EX1033 and their cab side hinge #EX1032 may work for you, however you're going to want to make…

view full answer...

Answer 2

We don't offer the Gator branded tonneau covers, and parts like these aren't typically tested for compatibility across brands. With that said, I've included a diagram that gives the measurements of the #EX1033 hinge so that maybe…

view full answer...

Answer 3

The Replacement Screen for Ventline Ventadome Trailer Roof Vents part #BVD0434-31 is used on the following Ventline models; V2092, V2110, V2094 and V2119. If you have the V2092, V2110, or V2119 then you'll need the Replacement Screen Frame with…

view full answer...

Answer 4

We do have that part for you! The correct part is the Replacement Tailgate Hinge for Extang Trifecta and eMax Tonneau Covers #EX1033. This is the same part as Extang's 35440400 that you reference.

view full answer...

Answer 5

Hi Guy, For the tailgate side you'll want the Replacement Tailgate Hinge for Extang Trifecta and eMax Tonneau Covers #EX1033. If you end up needing to replace the cab side then you'll want part #EX1032 as well.

view full answer...

Answer 6

The Yakima FatCat EVO 6 Ski and Snowboard Carrier #Y03096 and the smaller Evo 4 #Y03095 both include excellent mounting hardware that will fit any shape of roof rack crossbar, including factory bars, up to maximum bar dimensions of 3-7/16-inches wide…

view full answer...

Answer 7

The Yakima SkyBox 16 Roof Cargo Box is compatible with bars measuring up to 1-11/16" tall x 3-1/2" wide. The Yakima HD Crossbars like part #Y01159 measure 1-1/2" tall x 3" wide so they will be a fit for this cargo box. I…

view full answer...

Answer 8

You can use cargo boxes from different brands on other branded crossbars. The Yakima Skybox #Y07337 is about that size and will work with any Rhino Rack roof rack as long as the bars are less than or equal to 3-1/2 inches wide and 1-11/16 inches…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Will Extang Replacement Hinge Replace Gator SFX Tonneau Cover Hinge?

Product Page this Question was Asked From

Continue Researching