Replacement Tailgate Hinge For Extanag Trifecta and eMax Tonneau Covers 35440400

Question

Question:

Need a replacement hinge for tonneau soft tri-fold bed cover. Part# 35440400. Do u have it and what is the product number?

asked by: Nadia S

0

Expert Reply:

We do have that part for you! The correct part is the Replacement Tailgate Hinge for Extang Trifecta and eMax Tonneau Covers # EX1033.

This is the same part as Extang's 35440400 that you reference.

expert reply by: Bryce D

0

Answer 1

We do not offer any replacement parts that directly are for your Gator tonneau cover, however Extang also made Gator covers so their tailgate hinge #EX1033 and their cab side hinge #EX1032 may work for you, however you're going to want to make…

view full answer...

Answer 2

We don't offer the Gator branded tonneau covers, and parts like these aren't typically tested for compatibility across brands. With that said, I've included a diagram that gives the measurements of the #EX1033 hinge so that maybe…

view full answer...

Answer 3

Hi Guy, For the tailgate side you'll want the Replacement Tailgate Hinge for Extang Trifecta and eMax Tonneau Covers #EX1033. If you end up needing to replace the cab side then you'll want part #EX1032 as well.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 8

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 11

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 12

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Replacement Tailgate Hinge For Extanag Trifecta and eMax Tonneau Covers 35440400

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching