Replacement Pin for Roadmaster D-Ring Adapter RM-035

Question

Question:

Jameson that is correct, I am using the RM 035 kit and unfortunately lost one of my clevis pins from the kit. Would like to order a new pair. Thanks

asked by: Phil S

0

Expert Reply:

Do you have the Roadmaster RM-035?

expert reply by: Jameson C

0

Phil S.

12/31/2020

Jameson that is correct, I am using the RM 035 kit and unfortunately lost one of my clevis pins from the kit. Would like to order a new pair. Thanks

Jameson C.

12/31/2020

The replacement pin you'd need for the # RM-035 is the part # RM-910044.

Answer 1

Based on the information you have given me you have the Roadmaster Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars #RM-035 or #RM-035-1. Since you want to stick with Roadmaster parts, the correct replacement pin is the…

view full answer...

Answer 2

The Replacement Hitch Pin for Roadmaster Jeep D-Ring Bumper Mount Tow Bar Adapters #RM-910044 are 7/8" in diameter as they can fit in both 7/8" and 1" diameter mounting holes.

view full answer...

Answer 3

I checked with Roadmaster and the Replacement Safety Pins for Roadmaster Falcon and Eagle 8000 Tow Bars item #RM-910026 is what's used to secure the Hitch Pin for Roadmaster Jeep D-Ring Bumper Mount Tow Bar Adapters item #RM-910044. They use it…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Answer 11

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 12

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Replacement Pin for Roadmaster D-Ring Adapter RM-035

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching