What Is the Diameter of the Replacement Hitch Pin for Roadmaster D-Ring Adapter

Question

Question:

What is the diameter of the pin, and why wasnt that critical piece of information omitted from your description?

asked by: Jud

0

Expert Reply:

The Replacement Hitch Pin for Roadmaster Jeep D-Ring Bumper Mount Tow Bar Adapters # RM-910044 are 7/8" in diameter as they can fit in both 7/8" and 1" diameter mounting holes.

expert reply by: Bryce D

0

Roadmaster Replacement Hitch Pin Diameter
(click to enlarge)

Answer 1

Based on the information you have given me you have the Roadmaster Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars #RM-035 or #RM-035-1. Since you want to stick with Roadmaster parts, the correct replacement pin is the…

view full answer...

Answer 2

I checked with Roadmaster and the Replacement Safety Pins for Roadmaster Falcon and Eagle 8000 Tow Bars item #RM-910026 is what's used to secure the Hitch Pin for Roadmaster Jeep D-Ring Bumper Mount Tow Bar Adapters item #RM-910044. They use it…

view full answer...

Answer 3

Do you have the Roadmaster RM-035?

view full answer...

Answer 4

Hey Eric, thanks for reaching out! The parts I recommend for flat towing your 2006 Jeep Wrangler include the following: - Blue Ox Avail Non-Binding Tow Bar #BX7420 - D-Ring Adapter for 7/8" D-Rings #BX88357 or 1" D-Rings #BX88358 -…

view full answer...

Answer 5

Ken, the difference between the 7/8" adapters you have and the Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars #BX88358 is a 1/8", which is a sixteenth of an inch larger than what you need and should give you the…

view full answer...

Answer 6

I recommend using the Master Lock 1-9/16" Wide Solid Brass Body Padlock #ML140DLH with the Hitch Pin #RM-910044 for the Roadmaster D-Ring Adapters #RM-035-1. The locks have a 1/4" diameter that will fit inside the Roadmaster pin. This will…

view full answer...

Answer 7

Hey Paul, For a 2024 Ford Bronco Black Diamond the harness is going to vary depending on tail lights. I'm assuming you likely have LED's but we'll also need to see if you have variable voltage wiring. Variable voltage tail lights use the…

view full answer...

Answer 8

Thanks for reaching out to us here at etrailer. It looks like there might be some D-rings on your bumper. Is that correct? If so, do you know the measurement of those D-rings? You should be able to attach a photo to a response to this answer.

view full answer...

Answer 9

The Universal Jam Nut for Roadmaster Towbars #RM350264-10 you referenced is indeed a genuine Roadmaster tow bar jam nut and does come with red Loctite already on the threads (pictured below).

view full answer...

Answer 10

Hi Jason, Which product are you referencing when asking if it comes with safety pins? Is it a baseplate or the tow bar itself? The #RM-910026 you were looking at is designed to work with Roadmaster Falcon or Eagle 8000 tow bars specifically. If you…

view full answer...

Answer 11

The correct lynch pins to use with the Roadmaster Hitch Pin for Roadmaster Jeep D-Ring Bumper Mount Tow Bar Adapters #RM-910044 is the #RM-910024. These are sold in a pair.

view full answer...

What Is the Diameter of the Replacement Hitch Pin for Roadmaster D-Ring Adapter

Product Page this Question was Asked From

Continue Researching