How Does Air Lift Load Lifter with Steel Braided Cables Connect to Compressor Kit

Updated 12/29/2020 | Published 12/27/2020

Products Featured in This Question

Air Lift WirelessONE Compressor System for Air Helper Springs - Remote - Bluetooth - Single Path

(589)

$419.68

Air Lift Union Tee for 1/4" Air Lines

(940)

$6.29

Question:

I bought the air lift 5000 air bags with stainless steel hardware. These come with braided hoses that screw into the bag. I also bought the air lift wireless compressor system but I’m unable to connect the two because fittings are different. Do you have a T that I can buy so that I can connect the bags to the compressor and keep my bumper air fitting? Compressor is push in fitting and bags are screw on fittings.

asked by: Jorge V

Expert Reply:

When adding a compressor system like the WirelessONE # AL25980 to your Air Lift LoadLIfter 5000 that feature the braided stainless steel lines you will need to use the included AN to PTC adapter fitting. This fitting will then connect to the nylon air lines that go to the compressor. So the good news is that you already have the adapter you need.

I have attached an image from the installation manual that clarifies this.

For a union tee you'd want the part # AL21838.

expert reply by: Jameson C