Bolt Hole Dimension of Buyers Products Black Receiver Tube 3371804055

Question

Question:

The horizontal bolt hole dimension in the product pictures shows 3 1/2inch but in one of the question answers it shows 3 3/8. Which is correct?

asked by: Bob

0

Expert Reply:

The Buyers Products Black Receiver Tube part # 3371804055 has a vertical set of holes which are 3-1/2" apart on center and a horizonal set which are 3-3/8". I have attached a dimensions drawing from the manufacturer below.

expert reply by: Conner L

0

click to enlarge

Answer 1

You will need to order the Replacement Hardware Kit #RHK for your Reese 37096 Multi-Fit Receiver. This will ensure that you get all the correct hardware you need for your receiver. We no longer carry the fastener kits like you found for the other…

view full answer...

Answer 2

No, they do not. We haven't had any issues with the bolt heads and the welds interfering with each other on the Buyers Products Bolt-On 2" Hitch Receiver Tube - 20K item #3371804055. I have attached a picture below so you can see what this…

view full answer...

Answer 3

The mounting holes for the Buyers Products Black Receiver Tube #3371804055 have a 1/2" diameter.

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 7

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 8

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 9

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

view full answer...

Answer 10

Hi Chas, The Lippert Road Armor Shock Absorbing Equalizer part #LC53CK may work for your trailer, but that will depend on what equalizer is currently on your trailer. In order to determine what equalizers would be a fit for your trailer, we'll…

view full answer...

Answer 11

There is no exact way to determine the leaf spring length. The best way to determine the length for a replacement is by measuring the existing leaf springs. The hanger distance and shackle length can help you get a good idea, but you're looking…

view full answer...

Answer 12

Hi Austin, I can help you determine the right replacement double-eye leaf springs for your 2018 Jayco trailer, though we don't have any way of knowing what specific ones you need. It's pretty easy though, as all you need to do is measure your…

view full answer...

Bolt Hole Dimension of Buyers Products Black Receiver Tube 3371804055

Product Page this Question was Asked From

Continue Researching