Does the etrailer Trailer Hitch Fit My 2021 Audi Q5?

Question

Question:

Hello I would like to know whether Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 - C13331 will fit on Audi Q5 2021 Model. Could you please confirm? Thanks

asked by: Jayaram G

0

Expert Reply:

Yes! I confirmed with the manufacturer for you the # e94CR is a fit for the 2021 Audi Q5!

Also wanted to mention if you're using it for towing, the correct trailer wiring kit is part # 119250KIT.

expert reply by: Evangeline M

0

Answer 1

Hi Shawn; for your 2025 Audi Q5 PHEV I recommend the Curt Trailer Hitch Receiver #C98JR. This is a Class III hitch with a 2" receiver and a bolt-on installation. It has a 750 lb max tongue weight which will be more than enough to handle your…

view full answer...

Answer 2

Hey Laura! The etrailer Hitch item #e94CR is the correct one for the 2023 Audi Q5 PHEV. It fits both models of your vehicle which is why it says excluding Plug-In Hybrid and Plug-In Hybrid. Confusing, I know we get this question often. If you are…

view full answer...

Answer 3

It doesn't look like we have had a chance yet to install the etrailer Trailer Hitch Receiver part #e94CR on a 2020 Audi Q5 yet so I don't have any specific measurements for you. That said, based on the install photos we have of this and the…

view full answer...

Answer 4

Yes, the etrailer Trailer Hitch Receiver #e94CR will work with your 2022 Audi Q5 Plug-in hybrid. When it says that it fits the Plug-In Hybrid and excluding Plug-In Hybrid, it simply means that it fits both the Plug-In Hybrid and if you do not have…

view full answer...

Answer 5

The Tekonsha Powered Tail Light Converter #119250KIT will indeed work on your 2021 Audi Q5 Hybrid. The 119250KIT is a universal hardwire kit that can be used on virtually any vehicle regardless of differences in the electrical systems. The…

view full answer...

Answer 6

There is a trailer wiring harness for your 2021 Audi Q5, but only a universal hardwire kit, and not specific to your Audi. What you can use is the following: - ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector #119250KIT

view full answer...

Answer 7

We do; I was able to verify for you the etrailer Trailer Hitch #e94CR is a confirmed fit for your 2021 Audi Q5 PHEV. For trailer wiring on your '21 Q5 the no-splice ZCI kit part #119250KIT is a great solution that does not require cutting into…

view full answer...

Answer 8

Though we do have an option for your 2023 Audi Q5, at this current moment we will not have a plug and play harness available. The option that we carry is the ZCI Circuit Protected Vehicle Wiring Harness #119250KIT. This wiring harness bypasses…

view full answer...

Answer 9

The #e94CR Class III hitch is a fit for your 2022 Audi Q5 plug-in hybrid. Per the instructions, no battery removal is required. Installation will require that the rear bumper beam and the crossbar that sits above it are removed and left off the…

view full answer...

Answer 10

The Curt #C13331 trailer hitch is rated for all models of 2021 Audi Q5 and will fit your PHEV with S-Line trim. With this installing in between the bumper beam and frame/body of the vehicle, there will be no issues getting it installed on the entire…

view full answer...

Answer 11

We do not have any installers outside of our office in Wentzville Missouri. I recommend contacting a trusted local auto repair shop to complete the installation. Depending on what wiring you are looking to have installed we have helpful installation…

view full answer...

Answer 12

Yes, it does! The etrailer Hitch item #e94CR has been confirmed to fit the 2024 Audi Q5 Plug In Hybrid. This hitch is custom fit and bolts to your Audi with included hardware. It is a class III hitch with a 2" receiver so it will work great with…

view full answer...

Does the etrailer Trailer Hitch Fit My 2021 Audi Q5?

Continue Researching