Recommended Fifth Wheel Tailgate for my 2019 Ram 3500

Question

Question:

Im looking for a RV tailgate for my 2019 Ram 3500. All I see on your site is the net. I like the Stromberg. do you have that for my Ram?

asked by: Eric S

0

Expert Reply:

For your 2019 Ram 3500 the Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate with Lock for Dodge Trucks part # VGD-10-4000 will do the trick.

You will however loose the back up camera and the power tailgate lock. I have seen custom re fitting of the camera done to retain that but there is no pre made kit to make that happen available and would have the be fabricated.

expert reply by: Randy B

0

Answer 1

Hey Mike welcome back! 5" of clearance will be just fine so long as you're not off-roading. They recommend having 4" - 6" of clearance so if going up to the next set of holes gets you to level and you still have 5" clearance…

view full answer...

Answer 2

According to Stromberg Carlson, the #VGD-10-4000 only fits through the 2018 model year, and they aren't currently planning on offering fits for newer models. We do offer a net-style tailgate, part #TR-03 that's a fit for the 2020 Ram 3500…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 11

Hey Lars, welcome back! I can indeed confirm that the Furrion Variable Speed Chill Cube air conditioner with a heat pump is indeed really happening. They are currently available for order (02/04/26) and will be shipped out towards the middle of next…

view full answer...

Answer 12

Hi Matt, the easiest way to add a remote on and off control to your Victron MultiPlus-II part #VN73VR is by using the Victron VE.Bus Smart Dongle, part #VN27ZR, which lets you use your phone to turn the inverter on and off, monitor it, and adjust…

view full answer...

Recommended Fifth Wheel Tailgate for my 2019 Ram 3500

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching