Does Pigtail Adapter LC369413 Work With Lippert Motor LC379147

Question

Question:

will your replacement two wire pigtail adapter wire LC369413 work on my leppert motor 379147 or Kwikee 1101428 motor or do you have a two wire pigtail that will fit my motor Thank you

asked by: Rickey W

0

Expert Reply:

The Replacement Pigtail Adapter for Kwikee Electric RV Steps # LC369413 is the correct pig tail adapter for your Lippert Motor for Kwikee Electric RV Steps # LC379147 which is Lippert 379147 or Kwikee 1101428.

expert reply by: Samuel C

0

Answer 1

Hi Dan; it looks like you already figured it out but the Replacement Pigtail Adapter for Kwikee Electric RV Steps #LC369413 is the correct plug for your replacement motor #LC379147.

view full answer...

Answer 2

Yes, the Replacement Pigtail Adapter for Kwikee Electric RV Steps - 2 Wire - 6" item #LC369413 is the correct replacement adapter for the LCI 366043 motor that goes with the 32 Series Kwikee RV Electric Steps item #LC3722617.

view full answer...

Answer 3

The difference is that the part #LC3747453 comes with the Adapter/Harness #LC369413 and the Switch Magnet #LC369299 while part #LC3747452 does not. Aside from that these are the same step.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Does Pigtail Adapter LC369413 Work With Lippert Motor LC379147

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching