Replacement Cam Lock for 2021 Forest River Salem FSX 179DBKX

Question

Question:

I have 2021 Forest River Salem FSX 179DBKX. Current cargo locks are 751. Need replacement locks that are uniquely keyed. Please suggest what product will work to replace the 751 locks. thanks

asked by: Erik B

0

Expert Reply:

The Valterra cam locks like the part # A522VP are keyed unique and would work great to replace what you have.

expert reply by: Jameson C

0

Answer 1

Hey Mike, congrats on the new truck. The only problem I repeatedly see with covers like the BAK Revolver X4s Hard Tonneau Cover item #BAK99ZR is those straps that hold the cover open tend to wear out. The more you drive around with the cover rolled…

view full answer...

Answer 2

I took a look at the installation instructions for the B&W Companion 5th Wheel Trailer Hitch, part #BWRVK3500-5W. Per the instructions in the Helpful Tips section, they do list the areas of the hitch that need to be lubricated to assure good…

view full answer...

Answer 3

The Viair Portable RV Air Compressor Kit item #VA39WR you were looking at can be attached to either battery on your truck or camper. As far as grounding goes if you don't want to connect the other clamp to the positive post on a battery a spot on…

view full answer...

Answer 4

The Dexter part number 023-357-00 is a 12x2 electric brake assembly. The correct RH assembly to use to replace what you have would be the part #23-459 and for the LH assembly you would want the part #23-458 if you have 6K axles. If you have 7k axles…

view full answer...

Answer 5

The Dexter part number 023-357-00 is a 12x2 electric brake assembly. The correct RH assembly to use to replace what you have would be the part #23-459 and for the LH assembly you would want the part #23-458 if you have 6K axles. If you have 7k axles…

view full answer...

Answer 6

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Replacement Cam Lock for 2021 Forest River Salem FSX 179DBKX

Product Page this Question was Asked From

Continue Researching