Knurl Diameter and Under-Head Length of Titan Replacement Mounting Stud
Updated 11/12/2020 | Published 11/06/2020 >
Question:
Hi. Nice looking stud. I need some additional info on it to know if it will work for me. Usually wheel stud specifications include the diameter of the knurled part of the stud measured in thousands of an inch or mm. This determines if the stud will fit a certain diameter hub hole. Additionally the length of the stud without the head being included which is referred to as under head length. This gives the usable stud length which is common for measuring most bolts. I need to know the knurled diameter and under head length. Your stud supplier should know this info. Thank you Ken.
asked by: Ken F
Expert Reply:
I spoke with a contact at Titan, and part # T0508101 has a knurl diameter of 0.561 inches and an under-head length of 1.69 inches.
Product Page this Question was Asked From
Replacement Mounting Stud for Dexter 5 on 4-1/2 Hub and Drum for Hydraulic Brakes
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- Hardware
- Studs
- Dexter
more information >
Continue Researching
- Video: Hands-On with the Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 1-13/16" (Qty 4)
- Q&A: Correct Replacement Wheel Mounting Bolts for a Dexter Hub and Drum Assembly for 3.5K Axles
- Shop: Replacement Mounting Stud for Dexter 5 on 4-1/2 Hub and Drum for Hydraulic Brakes
- Shop: Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 1-7/8" (Qty 4)
- Shop: Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 1-13/16" (Qty 4)
- Shop: DeeMaxx Drive-In Wheel Stud - 1/2" Diameter x 1-11/16" Long
- Q&A: How to Pick out the Correct Replacement Knurled Bolt for a Dexter Braking Assembly
- Shop: Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 2-3/4" - Qty 4
- Shop: DeeMaxx Trailer Wheel Lug Nut - Chrome - 1/2" - Qty 1
- Shop: Kodiak Wheel Bolt - 1/2" Diameter x 2" Long
- Search Results: 1/2~20 wheel stud
- Search Results: dust cap
- Search Results: e track accessories
- Search Results: wheel stud
- Search Results: 1/2~20 stud
- Search Results: trailer lock
- Search Results: hitch lock
- Q&A: Does Maxxis ST235/80R16 Radial Tire w/ 16" Eagle Aluminum Wheel Come With Lug Nuts
- Q&A: Where Can I Find a Local Installer to Complete My Installation?
- Article: Which Hitches are Made in the USA
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Q&A: Overall Length and Socket Size for 1/2"-20 Taskmaster Trailer Wheel Lug Nut
- Q&A: Bearings and Grease Seal for Terran Axle Idler Hub
- Q&A: Upgrading Aftermarket Aluminum Wheels 15" and 16" For Camper And Utility Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Raise Your Travel Trailer Height
- Article: Can You Flat Tow a 2025 Cadillac Escalade?
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Accurately Measure Trailer Leaf Springs

