What is Shortest Retracted Height Swivel Trailer Jack

Question

Question:

Hi, I am looking for a short boat trailer jack to my Toyota RAV4 distance from gorund to middle of bracket no more than 11 inch

asked by: Nasir

0

Expert Reply:

The shortest retracted height swivel jack is the Pro Series Snap-Ring Swivel Marine Jack, part # PSEJ10000101 which has a retracted height of 11-5/16 inches.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I do have a jack for you but the etrailer Item #TJBB-2001-B you were looking at does not have the option to add a wheel. Instead you will want the Pro Series Snap-Ring Swivel Marine Jack item #PSEJ10000101. This jack is similar to the Fulton…

view full answer...

Answer 2

The 3rd generation Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter item #RP85FR weighs a hefty 220 lbs. You're exactly right the generations have differing weights which is why you're seeing different information. The Curt…

view full answer...

Answer 3

Hey Matt, so the correct Reese Goose Box you'd need for your 2024 Jayco Eagle 29DDB would be the part #RP85FR which fits the Rhino as well as the other standard Lippert pin boxes that your Jayco would have came with although we are pretty sure it…

view full answer...

Answer 4

Hi Matt, There is; the MORryde you have is essentially the replacement for the Lippert Rhino, so you'd want the Gen-Y that replaces the Rhino. The 5,500 lb pin weight Gen-Y that fits in place of the Rhino is the following: - Gen-Y Hitch Shock…

view full answer...

Answer 5

The Curt #C15320 that you referenced should fit your 2006 GMC Savana with a Knapheide Body if your mounting holes have a 40 inch center. Although the outside measurement is relevant, the more important measurement is the mounting hole center to…

view full answer...

Answer 6

Bracket height is the height of the jack from the center of the mounting bracket to the bottom of the jack when retracted and extended. In this case this jack #BD195356 is 15-1/8" Retracted and 30-1/8" Extended. From the top of the jack to…

view full answer...

Answer 7

I can understand how the wording could be confusing on whether or not the Curt #C94FR (56429) will work on your 2020 GMC Terrain, but I can confirm that it will indeed work for you without needing to install any extra fuses or relays on the vehicle.…

view full answer...

Answer 8

The Curt Vehicle Wiring Harness #C94FR that you referenced is supposed to be used if your 2019 GMC Terrain came with the factory tow package. If those fuse locations are empty, then it sounds like you don't have the factory tow package. As of…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

What is Shortest Retracted Height Swivel Trailer Jack

Continue Researching