Jack Height Dimensions of Bulldog Square Swivel Jack # BD195356

Question

Question:

The specs indicate a bracket height of 15 1/8. Is this referring to the height from the top of the mounting bracket to the bottom of the jack when retracted?

asked by: Kurt

0

Expert Reply:

Bracket height is the height of the jack from the center of the mounting bracket to the bottom of the jack when retracted and extended. In this case this jack # BD195356 is 15-1/8" Retracted and 30-1/8" Extended. From the top of the jack to the center of the bracket measures 9-1/4 inches.

expert reply by: Jameson C

0

Answer 1

Bulldog is made by the same company as Fulton so for a similar swivel trailer jack the part #BD195356 would work really great. It has a capacity of 3,000 lbs, swivels, and is a pipe mount so it would use same mount as what you have.

view full answer...

Answer 2

The inner diameter of the Weld-On 2" Diameter Pipe Mount Tube for Pipe Mounted Trailer Jacks #DL22670 is between 1-9/16 and 1-5/8 inches. Using a digital caliper, it is 1.605 inches. I've attached a video of this product to assist. We…

view full answer...

Answer 3

The Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15 inch Lift - 7,000 lbs, item #BD198250, has a male pipe on the jack and a female receiver that welds to the trailer. This female receiver has an inside diameter of just over 2-1/2 inches to fit…

view full answer...

Answer 4

The Curt Vehicle Wiring Harness #C94FR that you referenced is supposed to be used if your 2019 GMC Terrain came with the factory tow package. If those fuse locations are empty, then it sounds like you don't have the factory tow package. As of…

view full answer...

Answer 5

I can understand how the wording could be confusing on whether or not the Curt #C94FR (56429) will work on your 2020 GMC Terrain, but I can confirm that it will indeed work for you without needing to install any extra fuses or relays on the vehicle.…

view full answer...

Answer 6

The Curt #C15320 that you referenced should fit your 2006 GMC Savana with a Knapheide Body if your mounting holes have a 40 inch center. Although the outside measurement is relevant, the more important measurement is the mounting hole center to…

view full answer...

Answer 7

Hey Matt, so the correct Reese Goose Box you'd need for your 2024 Jayco Eagle 29DDB would be the part #RP85FR which fits the Rhino as well as the other standard Lippert pin boxes that your Jayco would have came with although we are pretty sure it…

view full answer...

Answer 8

The 3rd generation Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter item #RP85FR weighs a hefty 220 lbs. You're exactly right the generations have differing weights which is why you're seeing different information. The Curt…

view full answer...

Answer 9

Hi Matt, There is; the MORryde you have is essentially the replacement for the Lippert Rhino, so you'd want the Gen-Y that replaces the Rhino. The 5,500 lb pin weight Gen-Y that fits in place of the Rhino is the following: - Gen-Y Hitch Shock…

view full answer...

Answer 10

Hey Kelly, so clearance as we define it, is going to be the distance from the mounting bracket to the top of the jack tube excluding the handle. Both of the extended and retracted measurements are going to be taken from the bottom of the footplate to…

view full answer...

Answer 11

You would need a spacer of some type to allow the mounting brackets of the 55" Lock Side-Door Bar Lock Assembly #3057-55 to sit flush with the door so that it could close and latch. Otherwise the latch wouldn't get around the door.

view full answer...

Answer 12

I have a solution for you, but the Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15" Lift - 5,000 lbs #BD178203 is not compatible with the Fastway Flip Foot #FA88-00-4500 since the leg and inner tube are a single piece. Instead, you'd…

view full answer...

Jack Height Dimensions of Bulldog Square Swivel Jack # BD195356

Continue Researching