What Does It Mean By 34 Frame On Curt Gooseneck Hitch for 1999 Chevy K2500

Question

Question:

will it fit. what does it mean by 34inch frame?

asked by: Ed C

0

Expert Reply:

The Curt Double Lock, Flip and Store Underbed Gooseneck Hitch part # C60713 is a fit for a 1999 Chevrolet K2500 except for cab and chassis models which will have a 34" frame (measuring from the outside of one frame rail to the outside of the other) but if you have a regular truck bed you won't have to worry about this.

expert reply by: Conner L

0

Answer 1

I sure can! The Lippert 1716 Pin Box #LC1324791 you were looking at measures 36.4" long and 14" tall as shown in the included diagram provided by Lippert.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 7

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 8

Hey Matt, Furrion typically has 4 wires running to their thermostats and the Chill Cube Thermostat #LC74DX is no exception. The harness you see with the thermostat would plug into the Chill Cube's controller and has 4 wires to extra wire to to…

view full answer...

Answer 9

Hey Steven, yes the Curt gooseneck hitch part #C44NQ does fit your 2019 Ford F-250 that has the brackets on the frame rails already for the OEM gooseneck hitch.

view full answer...

Answer 10

Hey Jordan! Based on your measurement you have a Lippert 1116 or 1716. If you want to confirm that feel free to send me the S/N on your pin box. The Gen-Y Nomad you were looking at is for the Rhino Box so that is not a fit. What you need is the Gen-Y…

view full answer...

Answer 11

Thanks for the information Audrey and welcome back! For a weight distribution system that sets up quickly, I recommend the Andersen Weight Distribution Hitch w Sway Control item #AN28VR. The Andersen item #AN28VR uses chains instead of spring bars…

view full answer...

Answer 12

Hey Mark, the Andersen system part #AN88VR would be the best option for an Andersen WDH system for your 2026 GMC Canyon AT4. This fits the 2 inch hitch that your truck has and also has up to a 4 inch drop too which would be most likely right at what…

view full answer...

What Does It Mean By 34 Frame On Curt Gooseneck Hitch for 1999 Chevy K2500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching