bing tracking image
  1. Gooseneck Hitch
  2. CURT
  3. Below the Bed
  4. 30000 lbs GTW
  5. Flip-Over Ball
  6. Wheel Well Release
THIS ITEM IS NOT A FIT FOR
1992 Dodge Monaco
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
CURT

Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs

Part Number: C60713
In Stock
$558.32
Gooseneck Hitch
Not Confirmed to Fit

1992 Dodge Monaco

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Get a little extra security when you are towing with Curt's double-lock, gooseneck hitch. Chrome-plated ball locks in place with two pins while towing and flips over for storage inside the hitch when its job is done. Installation kit included. 1-800-940-8924 to order CURT gooseneck hitch part number C60713 or order online at etrailer.com. Free expert support on all CURT products. Great prices and Fastest Shipping for Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs. Gooseneck Hitch reviews from real customers.
  • All Info
  • Reviews (732)
  • Q & A (0)
  • Photos

CURT Gooseneck Hitch - C60713

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • Built for Heavy-Duty Weight: Rated for 30,000 lbs gross towing and 7,500 lbs vertical load.
  • Full Truck Bed Access: Pull the handle, flip the 2-5/16" ball, and drop it back to get your bed back.
  • Extra Secure Connection: Dual locking pins hold the chrome-plated ball firmly in place while towing.
  • Clean, Low-Profile Look: Chrome ring and rubber cover keep the bed surface tight and grime-free.
  • No-Weld Install Kit Included: Custom underbed design with Grade 8 hardware and 4" bed hole.

Features to know about

Built for Heavy Loads: 30,000 lbs GTW and 7,500 lbs Vertical Load

This Curt Double Lock gooseneck hitch is built to handle tough jobs. With a 30,000-lb gross towing weight and 7,500-lb vertical load capacity, it’s designed for hauling large equipment, livestock, or heavy fifth wheels without flex or rattle. The double-pin locking system secures the chrome-plated 2-5/16" ball firmly in place for extra confidence under load.

Full Bed Access When You’re Not Towing: Flip-Over Ball and Below-Bed Mount

When the trailer’s unhooked, you can flip the ball over and store it right in the hitch for a flat, clean bed. The below-bed design keeps everything out of the way so you can use your truck for other work without obstruction. A rubber cover fits over the ball hole to keep grime out when the ball is stowed.

Easy Operation from the Wheel Well: Spring-Loaded Release Handle

The comfort-grip handle mounts inside the wheel well so you can lock or unlock the hitch without climbing into the bed. Pull it out to release, rotate it to secure, and the double-lock pins snap into place to hold the ball tight. The built-in safety-chain hookups are easy to reach and ready for use whenever you hook up a trailer.

Curt Double Lock Flip and Store underbed gooseneck hitch installed in a truck bed, showing chrome-plated hitch ball locked in position for towing

Straightforward Installation: Custom Kit with Grade 8 Hardware

A custom mounting kit and Grade 8 hardware come in the box for a solid bolt-on install—no welding required. You’ll need a 4" hole in the bed for the ball and small holes for safety chains, but there’s no drilling into the frame. This setup gives you a secure underbed system that’s ready for years of heavy towing.

Specs

Weight and Capacity

  • Gross towing weight: 30,000 lbs
  • Vertical load: 7,500 lbs

Ball Information

  • Ball size: 2-5/16"

Warranty

  • Limited lifetime warranty

60607 Curt Double Lock Underbed Gooseneck Trailer Hitch - 30,000 lbs

60631 Curt 600 Series Gooseneck Hitch Installation Kit

Installation Details C60713 Installation instructionsAlternate Instructions C60713 Installation instructions

This Product Fits The Following Vehicles




Ratings & Reviews

4.6

731 reviews
Review sort icon
Get a little extra security when you are towing with Curt's double-lock, gooseneck hitch. Chrome-plated ball locks in place with two pins while towing and flips over for storage inside the hitch when its job is done. Installation kit included.

by:

The supplied mounting brackets didn't line up with anything on the frame. I had to modify the entire kit. I fo however like the locking mechanism.



by:

A well-designed, high-quality gooseneck hitch kit, that I probably could have installed myself if I would have had a hydraulic lift available. The installation video was very well done.



by:

After reading through the installation manual, thank you so much for the video. I used that as a reference while reading. Not sure I would have understood everything if that hadn’t been available.



by:



by:



by:



by:



by:

Great product fit my truck perfectly



by:

Everything looked to be packaged nicely i haven’t started the install though so time will tell.



by:

Works great and easy to install



by:

Great fit was very easy to install



by:

Hauls my trailer AMAZING!!!!!



by:

Perfect fit easy enough to install and easy to use really like this product



by:

Installed in a ‘95 Chevy K3500. Fit perfectly, easy install. Works like it should -no issues. Can highly recommend.



by:

Direct bolt up for 1997 Chevrolet C 2500 took me approximately an hour and a half to install and never removed the bed

Thomas profile picture

Thomas

7/14/2022

Great



by:

good product



by:

After a year of owning still looks great and performs great, install instructions were spot on and haven’t had any issues with hitch,use it almost every weekend.



by:

Will be returning. Crossbar pieces didn’t line up with bolt holes on brackets bolted to the frame. Angle iron crossbar didn’t even fit inberween the bed and frame. Also the bolts to go in the rear cross bar didn’t even thread in either the threads on the cross bar were the wrong size or the bots were the wrong size.



by:

Very fast shipping I’ve not got to install yet

Charles profile picture

Charles

10/16/2022

The curt turnover ball works great



by:

Used this kit to modify and fit my c notched lowered truck. Side plates welded to notch and hitch assembly is still removable. Kit was as described and am pulling 19k wit it and zero problems



by:

I purchased this gooseneck hitch about a year ago to go on my pickup. I didn't install it right away as I didn't have a trailer that needed a gooseneck hitch. I installed the hitch in April of 19 when I found a trailer that I wanted and needed to transport it. Everything installed smoothly and in about 4 hours. I was taking my time and triple measuring to make sure I didn't cut or drill holes in the wrong location. All of the bolt holes line up on the frame and the only drilling that I had to do wad through the floor of the bed for the hitch to come through and the u-bolts for the safety chains. Make sure that you read the instructions completely and carefully and the installation is a breeze. I am happy with this hitch and would buy another one for any new truck that I get.



by:

Perfect fit, sturdy, and instructions were almost perfect. Install time approx. 5 hr. without lift. Loosen and lift truck bed would have saved about 1 hr. Overall simple to install, all bolting points and hole were perfect .
Excellent Customer Service.
Special thanks to all who helped on ordering and shipping.

Hal profile picture

Hal

8/26/2018

Used this 4 or 5 times and works great. Checked all bolting points and still tight and secure. So far so good, working great.



by:

This is an excellent product. I installed the hitch myself and it was pretty straightforward. I did a lot of research on installing a below bed hitch to make sure it went well. I did have a small issue with getting one of the bars in. I put a call in and got great customer service. After a year of use I have had no issues at all. I will definitely use etrailer in the future.

Raymond profile picture

Raymond

12/9/2022

It has been two years of use with this hitch and it still works perfectly. I have had no issues at all.



by:

I installed the Curt gooseneck on my 1993 GMC 2 Wheel Dr. 2500 truck. All the components have tight tolerances. It took me eight hours. With a socket and the wrench. Laying on my back. I did have to cut the wheel well lip about 3/8 of an inch off because I could not get that front angle bar to slide in without hitting it, no way around it unless you lift the bed up and I wasn’t going to do that!!. You have to cut it.instructions do not state that. I’m very happy with the Hitch, it is definitely stout! I did have to make a notch on the outside brackets to go over my airbag bolt. I also had to remove the support bracket on the inside of the frame for the airbag and the crossmember for the spare tire to get the front angled bar in.



by:

I have not installed the hitch yet. The absolute best customer service I’ve ever experienced!! Paula is very knowledgeable and had it shipped out the same day. I highly recommend etrailer to anyone!


25
25

See what our Experts say about this CURT Gooseneck Hitch

  • Does Curt Double Lock Gooseneck Hitch Require Drilling Into 1999 Chevy Truck Frame for Installation
    Hey Dennis, thanks for reaching out! The Curt Double Lock # C60713 does NOT require drilling into your 1999 Chevy frame in order to install the side brackets. Obviously, you'll need to do some drilling into the bed for the receiver and safety chain loops, but you won't be drilling into your frame. If you don't already have a 7-Way socket in your truck bed, then I recommend installing the Hopkins # 41157 for easier access when towing your gooseneck trailer. Are you planning on installing...
    view full answer...
  • What Does It Mean By 34 Frame On Curt Gooseneck Hitch for 1999 Chevy K2500
    The Curt Double Lock, Flip and Store Underbed Gooseneck Hitch part # C60713 is a fit for a 1999 Chevrolet K2500 except for cab and chassis models which will have a 34" frame (measuring from the outside of one frame rail to the outside of the other) but if you have a regular truck bed you won't have to worry about this.
    view full answer...
  • Recommended Gooseneck Hitch for 1995 Chevy K3500 to Use with B&W Companion
    We do have a few gooseneck hitches available that are designed to fit your 1995 Chevrolet K3500 Crew Cab, such as the Curt # C60713, however you will only be able to use your B&W Companion with a B&W Gooseneck Hitch. The B&W Companion 5th Wheel Trailer Hitch # BWRVK3500-5W is only compatible with the B&W under bed gooseneck system. In order to still use your Companion Hitch, I recommend the B&W Gooseneck # BWGNRK1000. This will include the 2-5/16 inch hitch ball and provide a gross towing...
    view full answer...
  • Recommended Underbed Gooseneck Hitch for a 1993 Chevrolet C/K Series Truck
    I have a solution for you but the Curt item # C60652 will not fit your 1993 Chevrolet C/K Series truck. Instead you will want the Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit item # C60713. This kit fits both the 6-1/2' and 8' bed models not the cab and chassis model.
    view full answer...
  • B&W Gooseneck & 5TH Wheel Hitch For a 1996 GMC C/K Pickup With Long Bed
    The B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter # BWRVK3500 can only be used with the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1000 on your 1996 GMC C/K Pickup with the 8' bed. The Comanion hitch has a square shank that drops into the Turnover hitch slot. The Curt Double Lock, Flip and Store Underbed Gooseneck Hitch # C60713 has a round hole that will accept either the included gooseneck ball or a Curt X5 5th Wheel Base Rails Adapter # C16210 if you wanted...
    view full answer...
  • Will the Curt Double Lock Gooseneck Hitch 60713 Fit a 1998 Chevrolet C/K Series Pickup
    I just spoke with my contact at Curt and they informed me that the Curt Double Lock, Flip and Store Underbed Gooseneck Hitch part # C60713 will fit a 1998 Chevrolet C/K Series Pickup with the stepside bed. The only issue you are going to run into with an in-bed hitch on a stepside is bedside clearance with a 5th wheel trailer. There should not be any issues whatsoever with a gooseneck trailer. The only other item I recommend for your truck for pulling a gooseneck trailer is an in-bed 7-way...
    view full answer...
  • What is Needed to Add Gooseneck Trailer Hitch to 1993 Chevy 3500
    All you need to add a gooseneck trailer hitch to your 1993 Chevy 3500 truck is the gooseneck hitch and brackets (which come together), and a gooseneck wiring harness. For your truck, we do have an option for a hidden gooseneck, from Curt: - Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit # C60713 The Double Lock # C60713 has everything you need for the installation in your truck, and fits both the 8 foot long bed and 6-1/2 foot short bed. If you do have a...
    view full answer...
  • Underbed Gooseneck Trailer Hitch Fit 1997 GMC C/K Long Bed
    I'm happy to let you know that indeed there is a fit for a Curt underbed gooseneck trailer hitch for your 1997 GMC Sierra (also referred to as a C/K Series)! What you are looking for is the Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit # C60713.
    view full answer...
  • Gooseneck Hitch Ball With 1 Inch Rise For 1994 Chevrolet C/K Series Pickup
    Since it looks like you came from a gooseneck hitch, I assume you are looking for a gooseneck hitch ball with a longer shank for your 1994 Chevrolet C/K Pickup. If you have a Curt Double Lock, Flip and Store gooseneck hitch, part # C60713 I recommend part # C60603. This provides an additional 1 inch of height and has a hitch ball size of 2-5/16 inches. if you have a Draw-Tite Hide-A-Goose Underbed Gooseneck Trailer Hitch, like part # 9465-40, the replacement ball that has a 1 inch rise...
    view full answer...
  • Will Curt Double Lock, Flip and Store Underbed Gooseneck Hitch Fit 1995 Chevy Pickup
    The Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit # C60713 will indeed fit your 1995 Chevy Pickup whether you have a long or short bed just as long as it is not a Cab and Chassis or one with 34 inch frame. While the Curt gooseneck hitch has a weight rating of 30,000 lbs I would be shocked if your pickup could handle that much weight. I took a look at an online version of the owner's manual for your pickup and all it stated was to contact GM about the max...
    view full answer...
  • Gooseneck Rail Kit and Hitch Recommendation for a 1988 Chevy V30
    I spoke to my contact at Curt and he informed me that the only gooseneck option they have for you setup would be to go with a Universal Gooseneck Rail Kit # C61502 and then a Folding Ball Gooseneck Hitch # C-52. I attached installation instructions for both products for you to check out.
    view full answer...

Do you have a question about this Gooseneck Hitch?


Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Kathleen M
Updated by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Isabelle B
Updated by:
Isabelle B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924