Andersen Weight Distribution System for 2026 GMC Canyon AT4

Question

Question:

Any recommendations as to which Andersen WDH with sway control for my 2026 GMC Canyon AT4? I will be using this for my tandem axle Sure Trac Cargo Trailer 7x14.., thanks

asked by: Mark C

1

Helpful Expert Reply:

Hey Mark, the Andersen system part # AN88VR would be the best option for an Andersen WDH system for your 2026 GMC Canyon AT4. This fits the 2 inch hitch that your truck has and also has up to a 4 inch drop too which would be most likely right at what your trailer would need as well.

expert reply by: Jameson C

1

Answer 1

Thanks for the information Audrey and welcome back! For a weight distribution system that sets up quickly, I recommend the Andersen Weight Distribution Hitch w Sway Control item #AN28VR. The Andersen item #AN28VR uses chains instead of spring bars…

view full answer...

Answer 2

Hey Mark, yes we do have a version of the Andersen part #AN88VR with a 2-5/16 inch ball instead with the part #AN53VR. What does your trailer weigh?

view full answer...

Answer 3

Hey Chris, normally I am not one to recommend the Andersen weight distribution systems because they don't work awesome at higher tongue weights but based on the towing capacity of your 2025 Hyundai Palisade and fact you want a lighter weight…

view full answer...

Answer 4

Hey Dan, I attached a picture that has all of the dimensions of a similar shank that comes with the Andersen Weight Distribution System part #AN28VR that you referenced. Let me know if you will have enough clearance, are you running your current…

view full answer...

Answer 5

Hey Michelle! There are definitely a lot of different weight distribution hitch (WDH) options out there. The most important thing is to make sure it is properly rated for the tongue weight of your setup. Looking at the specs for the 2022 Keystone…

view full answer...

Answer 6

Hi MH, The balls for the Rapid Hitch Adjustable, Locking, Aluminum Ball Mount Kit #AM3400 can rapidly be changed out by removing the bracket that holds the balls and then pulling out the locking pin #AM3440. With it removed you can slot in one of…

view full answer...

Answer 7

To confirm which weight distribution hitch will work to tow your trailer with a GVWR of 4995lbs you will need to measure its tongue weight, as the tongue weight rating is usually with the trailer unloaded and will not be accurate. The easiest way to…

view full answer...

Answer 8

A weight distribution system does not increase a hitch's tongue weight capacity. Rather, it takes weight off of the tongue, helping loads stay stable and level. In other words, if you use a trailer without a weight distribution system with a…

view full answer...

Answer 9

I recommend the Blue Ox TrackPro Weight Distribution #BLU36FR as it has the slightly higher tongue weight rating of 600lbs vs the Blue Ox SwayPro #BXW0550 that only goes to 550lbs. With the dry tongue weight on your 2022 Winnebago Micro Minnie…

view full answer...

Answer 10

Looking up the information on your 2024 Winnebago Micro Minnie 1800BH I see you have a dry hitch weight of 374lbs as it leaves the factory. As the dealer will fill the propane tanks with 40lbs of propane and add a battery this will give you a hitch…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Andersen Weight Distribution System for 2026 GMC Canyon AT4

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching