Parts Needed to Install Redarc Tow Pro Elite on 2020 Jeep JLU Wrangler Unlimited

Updated 10/10/2020 | Published 10/08/2020

Products Featured in This Question

Redarc Tow-Pro Elite Brake Controller - Dash Knob - Off-Road Mode - Up to 3 Axles - Proportional

(1676)

$290.00

Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Jeep

(196)

$21.94

Question:

Were getting ready to install Draw-Tite Max-Frame Trailer Hitch Receiver on our 2020 Jeep Wrangler Unlimited Rubicon to tow a 2021 Flagstaff E-Pro E19FBS camper. Our Jeep does not have the tow package, but I am getting the wiring installed by the dealership in the next few weeks. Once we have the hitch and the Mopar wiring kit installed, what do we need to purchase to install a Redarc Tow-Pro Elite Trailer Brake Controller # 331-EBRH-ACCV2? Thanks!

asked by: Chris G

Expert Reply:

The RedArc Tow Pro Elite # RED44FR comes with all of the components you'll need to install the controller on your 2020 Jeep JLU, but since you don't have the towing package you will need to hard-wire the controller in. If the dealership installs a plug in connector into the vehicle while they're installing your wiring, you can use the Plug and Play Adapter # 3073-P instead of hard-wiring in the controller-which would be a much easier solution, but I'm not sure if that's possible for them to do.

I've linked an installation video of the Tow Pro Elite on a similar JLU for you to have a look at and use as a rough guide, as well as some helpful articles on brake controller installation.

expert reply by: Erik B