Weight Load Range for Roadmaster Cable Connector Set # RM-910022

Question

Question:

will this link hold 7000 lb. ?

asked by: Larry M

0

Expert Reply:

I contacted the manufacturer to find out the load range for this product, part # RM-910022. It is specified for a 2000 pound snap rating.

Please note that cable connectors of this type are designed and rated specifically for a horizontal line pull application (but not for hoisting or lifting). The capacities quoted by manufacturers are for this type of application only.

I suggest you consider Hidden Hitch part # C82932, which also comes as a set of two. These half-inch Quick Links have a Safe Working Load limit of 3,300 pounds and a maximum capacity of 16,500 pounds each.

The working Load Limit (WLL) is the load that can be handled in actual use. For example, if you should encounter a pot hole while underway the actual short-term force presented to the connector could be many times the WLL, and could approach the maximum capacity. It is not recommended to exceed the WLL in any application.

expert reply by: Adam R

0

Answer 1

It really depends on your setup, if the safety chain loops on your tow vehicle are spaced far apart then you will need more slack to make a tight turn then if they were closer together. What I would recommend you do is connect your trailer to your…

view full answer...

Answer 2

I do have an option but we do not have any way for you to safely add onto your existing chains. It would be difficult to match the grade and construction of the chain as well so it will be better to just replace them altogether. For this, I recommend…

view full answer...

Answer 3

I am not aware of a bolt-on version of the Buyers Products Weld-On Safety Chain Retainer part #3375471000. However, if all you were wanting to do is mount your safety chains to the tongue of your trailer then you will just simply do so by running a…

view full answer...

Answer 4

For the Buyers Products 3/8" x 35" Class 4 Trailer Safety Chain w/ Clevis Hook #337B03835SC I recommend using either the Buyers Products Safety Chain Clip #337SC38B or Buyers Products Weld-On Safety Chain Retainer For 3/8" Chain…

view full answer...

Answer 5

Thanks for the information David and welcome back! The Hellwig Rear Anti-Sway Bar item #HE78RR is the correct one for a 2026 Ford E-450 chassis. However, for the front you'll need the Hellwig item #HE26GR. This is a 1-3/8" diameter front…

view full answer...

Answer 6

Hey George, great info! Yes, the Weigh Safe True Tow system is designed so the spring bars can be changed out for different tongue weight ranges. At this time, the replacement spring bars currently listed are primarily the higher-capacity versions.…

view full answer...

Answer 7

The Curt T-connector vehicle wiring harness for factory tow package 7 way and 4 pole flat connectors #C55774 is a confirmed replacement and fit for your Ford F-150 Lariat. It connects quickly and easily with no cutting or splicing of wires. The…

view full answer...

Answer 8

I definitely understand how safety chain capacities and determining exactly what chain rating you need for your trailer can be a bit confusing. To keep it as simple as possible, safety chain requirements state that the breaking strength of EACH…

view full answer...

Answer 9

Hi James! With your GVWR being 7,600 pounds, your loaded tongue weight should be around 760 pounds. With that said, I recommend going with the Weigh Safe True Tow Weight Distribution Hitch - 2" Shank - 6" Drop - 8.5K GTW, 850 lbs TW…

view full answer...

Answer 10

Hey Joe, thanks for all of the details you mentioned. The Bulletproof Hitches Safety Chains part #BPH94MR that you referenced would be exactly what you are looking for. These are 38 inches long and are 5/16 inch in diameter as well. For a set of…

view full answer...

Answer 11

Hey Cody! The brake controller I recommend for your setup is the Redarc Tow-Pro Liberty Brake Controller #RED74CR. The Liberty is simple, reliable, and has a really clean look once installed. The main unit is hidden so the only thing you see is the…

view full answer...

Weight Load Range for Roadmaster Cable Connector Set # RM-910022

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching