How To Use Jeep Wheels With Timbren Axle-Less Trailer Suspension System
Updated 07/18/2024 | Published 09/25/2020
Products Featured in This Question
Question:
Hi, I am building a small trailer to tow with my Jeep. I want to use the Timbren axle-less suspension and a set of stock 17 inch Jeep Wrangler wheels that have a 5x5 bolt patter. What hubs can I use? What other parts would I need? Thanks,
asked by: Alan
Helpful Expert Reply:
In order to use Jeep wheels with the Timbren Axle-Less Trailer Suspension System you'll need to go with the part # ASR1THDS03 which has a 2,200 lb weight capacity. This can then be used with the Trailer Idler Hub Assembly part # AKIHUB-550-35-EZ-K or the Trailer Hub and Drum Assembly part # AKHD-550-35-EZ-K and Electric Trailer Brake Kit part # AKEBRK-35-SA if you need brakes. This will give you a 5 on 5" bolt pattern to use the Jeep wheels as well as the lift and offset needed for clearance.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2.2K
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- No Hubs
- 2200 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2.2K
- Search Results: spindle cotter pin
- Video: Comprehensive Review: 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles
- Video: An In-Depth Look at the Trailer Axle with Idler Hubs
- Video: All About the Dexter Idler Trailer Axle w/ Hubs
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Q&A: Timbren Axle Less Setup for Off Road Camper that Uses Jeep Wheel Bolt Pattern
- Q&A: Can 17" Jeep Wheels W/ 5 on 5" Bolt Pattern Be Used On Off-Road Trailer?
- Shop: 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 6 on 5-1/2
- Shop: 3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles - 25-1/8" Long
- Shop: Dexter Idler Trailer Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs
- Video: All You Need to Know About the Dexter Trailer Idler Hub Assembly for 3,500-lb Axles
- Video: Hands-On with the Trailer Idler Hub Assembly for 3,500-lb Axles
- Video: TRED GT Wheel Chocks Feature Review
- Video: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles: The Breakdown
- Q&A: Recommended Hubs and Brakes to Build Offroad Trailer with Timbren Axle-Less Trailer Suspension
- Q&A: Recommended Timbren Axle-Less Suspension for Off Road Trailer
- Q&A: How To Use 5 on 5 Wheels with the Timbren Heavy-Duty Axle-Less Trailer Suspension
- Q&A: Can Passenger Vehicle Tires be Used on a Trailer to Increase the Ground Clearance
- Q&A: What is The Difference In The Dexter Trailer Hub/Drum Assemblies # 84656UC3 & # 84656UC3-EZ?
- Search Results: spring perch
Igotchu C.
7/17/2024
With no brakes. Gonna be on a overland trailer 4x7.