Wall Control Panel that Fits MaxxAir Roof Vent 00-7500K

Question

Question:

if i understand correctly this will work with the maxxair 00-07500K fan. my question is how does it connect? it looks like there is a plug on the back of the switch but how does that connect to the fan to control it? i do not have the fan yet. i am just looking at pictures on line and i am unable to see any kind of connection other than the 12v supply.

asked by: Al

1

Helpful Expert Reply:

Yes the Replacement Wall Control Panel for MaxxAir MaxxFan Plus Roof Vent # MA59FR is correct for the MaxxAir fan 00-07500K fan. The fan comes with an RJ11 style of wire that you'd run to the wall switch # MA59FR.

expert reply by: Jameson C

1

Answer 1

To connect the Wall Control Panel for MaxxAir MaxxFan Plus Roof Vent #MA59FR you will need - if you don't have it - the Replacement Control Cable for MaxxAir MaxxFan Plus Roof Vent Wall Control Panel #MA69FR. You'll need to route that cable…

view full answer...

Answer 2

Both the #MA00-07500K and the #MA00-07000K can be used with a wall control setup but they only come with a remote control. So for either you'd also need the wall controller #MA59FR. With this installed you'd be able to control the fan with…

view full answer...

Answer 3

To properly install The Replacement Key Wall Control For MaxxFan Plus and Deluxe - 4 Key #MA00A03550K you will need The Communication Cable #34279523. I attached a review video link below.

view full answer...

Answer 4

Hello Phil, thanks for getting in touch. The MaxxFan Deluxe #MA00-07500K is a great choice for a vent fan and it can be used to replace your current vents. This vent can only be operated with the manual controls on the vent itself, or with the…

view full answer...

Answer 5

The MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - Smoke #MA00-07500K is not compatible with the old 4 key wall control. It will work with the 2 Key control or the 6 key wall control only as outlined in the…

view full answer...

Answer 6

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 7

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 8

Thanks for reaching out Craig, happy to help! Yes, the Soft Start Kit for Coleman-Mach RV Air Conditioners #CM56RR is compatible with the Coleman-Mach 3 (8333E8564). I reached out to Coleman directly for confirmation. Do you typically camp on hookups…

view full answer...

Answer 9

Hey Gene, welcome back! The correct tie-downs are the TorkLift Talon item #TL45SV, you were looking at. This a set of front and rear tie-downs. The rear ones will attach directly to your 2025 Ford F-450's TorkLift SuperHitch Magnum hitch item…

view full answer...

Answer 10

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 11

Hello Joe, Thank you for reaching out! The Power Mountain Tallboy Off-Road Bottle Jack - 11-5/16" to 27-1/16" Lift - 12 Tons #PM94FR does have the capacity you’d need, but since your fifth wheel’s frame sits about 25" off the ground,…

view full answer...

Answer 12

Hi John, Thanks for letting us help. Yes, the #CM56RR is the correct soft start kit for your Coleman Mach air conditioner. This kit is compatible with Coleman-Mach 45000, 47000, and 48000 series air conditioners. Based on the part number you…

view full answer...

Wall Control Panel that Fits MaxxAir Roof Vent 00-7500K

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching