Connecting Replacement Wall Control Panel for MaxxAir MaxxFan Plus MA59FR

Updated 07/22/2022 | Published 07/20/2022

Products Featured in This Question

Replacement Wall Control Panel for MaxxAir MaxxFan Plus Roof Vent

(59)

$23.25

Replacement Control Cable for MaxxAir MaxxFan Plus Roof Vent Wall Control Panel - 20'

(22)

$29.05

Question:

I have a 6 bullon wall control that I got with the Maxxair deluxe fan that I installed. The fan also came with a remote control which I use mostly. But I was wondering about hooking the wall controller up also so I could mount it beside my sofa as the remote wont turn operate the fan from that distance. But I cant fine anything showing how to connect the controller to the fan. Where does the wire go onto the fan? Are there any instructions for this? Thank you

asked by: Henry A

Expert Reply:

To connect the Wall Control Panel for MaxxAir MaxxFan Plus Roof Vent # MA59FR you will need - if you don't have it - the Replacement Control Cable for MaxxAir MaxxFan Plus Roof Vent Wall Control Panel # MA69FR.

You'll need to route that cable between the panel and the fan; there aren't separate installation instructions, but from the install instructions I found of the fan itself, you'll need to route the # MA69FR from the panel to the control board via a hole in the side of the bottom of the fan.

expert reply by: Kyle S