2001 Ford Excursion Hitch That Offers More Than a 1,400 lb. Tongue Weight

Question

Question:

Hi, I need to replace my factory hitch and would like one rated at 1400 lbs max hitch weight, do you have anything that bolts on? Thanks.

asked by: William H

0

Expert Reply:

The TorkLift SuperHitch Original Trailer Hitch Receiver part # TLF1006 is designed to be a direct bolt on installation. It offers a 1,700 lb. tongue weight rating when used typically or 2,000 lbs. when used with weight distributionand will takes care of your needs.

expert reply by: Randy B

0

Answer 1

Your best route is to replace your entire surge brake assembly as Atwood no longer produces any parts for their brake actuators. The Titan Zinc-Plated Brake Actuator #T47457207K is going to be your best replacement available. It is specific to disc…

view full answer...

Answer 2

The big differences between a Class IV and a Class V hitch are the capacities and the opening size. Class IV is going to be a 2 inch hitch opening that has tongue weights typically up to 1,200 lbs and total trailer weight of 12,000 lbs. For a Class V…

view full answer...

Answer 3

Both of the 2" receivers on the TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2" Receivers #TLF1006 have the same tongue weight rating of 1700lbs and trailer weight rating of 17000lbs, Or 2000lb tongue…

view full answer...

Answer 4

Our only custom fit trailer hitch receivers we have for your 2000 Ford Excursion are the Curt Class IV #C14011 and Torklift Class V #TLF1006. The Curt has one 2" receiver while the Torklift has two 2" receivers. We do have a Curt Class 5…

view full answer...

Answer 5

I have a very high capacity hitch I can recommend for your 2005 Ford Excursion, but the Curt part #C15410 is not it. Instead you would want the Torklift part #TLF1006 which is a confirmed fit and has a 1,700 lb tongue weight capacity and a 17,000 lb…

view full answer...

Answer 6

Hello Kyle. I am very sorry but we do not have a Class V hitch for the 2003 Ford Excursion. We do however have a Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" #C14011 which is a custom fit to your Excursion. This hitch will line up…

view full answer...

Answer 7

If your trailer is really weighing up to 15k you should check the owners manual of your Excursion to be sure you aren't exceeding the towing capacity. We really can't recommend ever exceeding the capacity even with a weight distribution…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

2001 Ford Excursion Hitch That Offers More Than a 1,400 lb. Tongue Weight

Product Page this Question was Asked From

Continue Researching