Mounting E-Track to 2x8 Trailer Floor Boards

Updated 09/09/2020 | Published 09/04/2020

Products Featured in This Question

Buyers Products Horizontal E Track - Gunmetal Gray Powder Coated Steel - 5' Long - Qty 1

(53)

$31.84

etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 3

(250)

$27.40

Question:

Can the e track be screwed to the 2 x 8 on the trailer floor or does it have to be bolted through the floor? If screwed down, what kind of screws are recommended. What gauge metal is the etrack?

asked by: Daniel U

Expert Reply:

The Buyers Products Horizontal E-Track - Gunmetal Gray Powder Coated Steel - 5' Long - Qty 1 # 3371903055 is 12 gauge steel and it can be screwed down directly to the trailer floor but won't have the same strength as if it were bolted through the floor. I recommend using wood deck screws that are 5/16 inch diameter and 1-1/2 inch length if attaching to the 2x8s. If you want a stronger connection, I recommend using the E-Track Backing Plate - Zinc Plated Steel - 6-1/2" Long x 6" Wide - Qty 1 # e46RR in 3 locations for a 5 foot E-track and then using screws and locknuts. The hardware will need to be obtained from a local hardware store.

expert reply by: Jason S